Fuel Pressure conversion rate for e-01
Fuel Pressure conversion rate for e-01
Jeff (350Now) contacted Defi of Japan, to get the conversion rate for the Defi fuel pressure rate that we both have (and gg has)
They told him the white wire was the one to tap into to receive the signal, and Sensor is a 5v sensor. 0 psi = 0.5V and 115 psi = 3.672V
In the e-01 under analog input, there is 2 spaces for input (for each of the 2 analog inputs)
Volt ____ _____
Conversion _____ _____
I have
0 - .5
115 - 3.67
My gauge shows 52 psi at idle, and the e-01 show 72 psi
So I am not inputing it in correctly
What do I need to put ?
They told him the white wire was the one to tap into to receive the signal, and Sensor is a 5v sensor. 0 psi = 0.5V and 115 psi = 3.672V
In the e-01 under analog input, there is 2 spaces for input (for each of the 2 analog inputs)
Volt ____ _____
Conversion _____ _____
I have
0 - .5
115 - 3.67
My gauge shows 52 psi at idle, and the e-01 show 72 psi
So I am not inputing it in correctly
What do I need to put ?
Registered User
Joined: Feb 2003
Posts: 449
Likes: 0
From: Silverdale, WA
Re: Fuel Pressure conversion rate for e-01
Originally posted by ACP
Jeff (350Now) contacted Defi of Japan, to get the conversion rate for the Defi fuel pressure rate that we both have (and gg has)
They told him the white wire was the one to tap into to receive the signal, and Sensor is a 5v sensor. 0 psi = 0.5V and 115 psi = 3.672V
In the e-01 under analog input, there is 2 spaces for input (for each of the 2 analog inputs)
Volt ____ _____
Conversion _____ _____
I have
0 - .5
115 - 3.67
My gauge shows 52 psi at idle, and the e-01 show 72 psi
So I am not inputing it in correctly
What do I need to put ?
Jeff (350Now) contacted Defi of Japan, to get the conversion rate for the Defi fuel pressure rate that we both have (and gg has)
They told him the white wire was the one to tap into to receive the signal, and Sensor is a 5v sensor. 0 psi = 0.5V and 115 psi = 3.672V
In the e-01 under analog input, there is 2 spaces for input (for each of the 2 analog inputs)
Volt ____ _____
Conversion _____ _____
I have
0 - .5
115 - 3.67
My gauge shows 52 psi at idle, and the e-01 show 72 psi
So I am not inputing it in correctly
What do I need to put ?
Then the high and low of what ever the sensor outputs goes in the second.
volt .5 - 3.627
Conversion 0 - 115psi
Gary
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM
