Anyone else with Front Mount Intercoolers having heat issues this summer?
Has anybody tried the nitrous sprayer to the intercooler to cool the intercooler? Is it worth buying for our Z's? They go for around $350 with a 5lb bottle and everythig u need to install it.
Originally posted by 12SecZ
Hey Boog,
Doug suggested soing exact;y as G3Po suggested and has proven it to be a solution for the A5T's running high stall verters.
He gace me a Napa part # 99MPMTJ00.
Peas!
Hey Boog,
Doug suggested soing exact;y as G3Po suggested and has proven it to be a solution for the A5T's running high stall verters.
He gace me a Napa part # 99MPMTJ00.
Peas!
Reading that made me wince, I am sorry that my posts are so unreadable at times. I just finished a 60 hour work week in 4 days with travel time and when I am tired I need to proof read my messages better.
It's just a Tranny cooler and Doug is placing them over by the compressor somewhere. It would be cool if Scott could post a pic of the location. The B&M or Summit 16gvw will also work and is only about 40 bucks or so, I know of others running the B&M tranny cooler on our Z's with success and is what I will go for when I get time.
Any updates on your car Scott? I was J/K about driving it I'm sure you know. My car hits 10 PSI though not 9. Could be the altitude?
Call Doug at Crawford and get the part number.
It's just a Tranny cooler and Doug is placing them over by the compressor somewhere. It would be cool if Scott could post a pic of the location. The B&M or Summit 16gvw will also work and is only about 40 bucks or so, I know of others running the B&M tranny cooler on our Z's with success and is what I will go for when I get time.
Any updates on your car Scott? I was J/K about driving it I'm sure you know. My car hits 10 PSI though not 9. Could be the altitude?
Call Doug at Crawford and get the part number.
I called Edge today..He has them too .He has one that stays closed untill tranny fluid gets hot , then opens...that would be the one to get . You wouldnt run to cool in none hot months
Max, the cooler is installed inbetween the radiator and the I/C. It is located on the drivers side just behind the I/C pipes so the air can still hit it. Sorry I don't have pics right now.
My car is still in Nashville. The ECU is being reflashed and should be back next week. The car wont dyno until the end of next week. Doug told me he thought my car was hitting 10PSI now.
My car is still in Nashville. The ECU is being reflashed and should be back next week. The car wont dyno until the end of next week. Doug told me he thought my car was hitting 10PSI now.
Thread
Thread Starter
Forum
Replies
Last Post



