I'm removing the rear rotor right now. I took off the two torque bolts and the two caliper bolts, but my rotor won't come off. I also don't have my parking brakes on. Do I need to remove any other bolts, or do anything else?

 

If it's anything like the 300zx. You need two 10mm bolts, screw them in, tighten them down and poof - she's off.

 

and a mallet

 

+1 On the mallet

 

those rears a B!tch...for real.

 

just bang them bisches off with a big rubber







mallet that is

 

Sledgehammer.

 

First, use liberal amount of wd or equivalent, leave alone for a short while, then rubber mallet if you would need to reuse the rotor later

 

I've done about 6 brake jobs on a few different z's and g's. WD40 and a rubber mallet. Tap, tap, tap and off they come.

 

Stand with your back facing the rotor. Donkey kick.

 

Rubber mallet FTMFW!

 

DOnkey kick LMFAO!!!!!

Ha ha ha ha ha

 

 

WD did nothing for me. I used it 2 times and let it sit for 10 minutes each time. I then got some other stuff PB Blaster I think it is called and they came off 10 minutes later no problem. Rubber mallet too of course.

 

yeah mine were on pretty tight and rusted but i just kept banging the rotor til it shook loose. good luck and i hope you got em by now lol.

 

take your parking brake off . . . .
that and +1 on the bolts through the caliper mouunt

 

^^^^^^^^^^^^^

I was gonna say turn off the e-brake!