Just got back from a dyno run and as you can tell im really pleased with the results. I did 3 pulls 242, 242, 244. The TQ stayed around 279lbs.

This car is BONESTOCK with 10k on it. It was a decent day around 88degrees and the humity was rather low.

here is a link to the Dyno Graph if the pics dont work

http://www.geocities.com/xlacrosse/g...yno8-23-03.jpg




::seems to be that the dyno image isnt workin correctly, if you email i can send it to you till I host the chart somewhere else. ::

 

Nice dyno results. Do you have 5AT or 6MT?

 

[QUOTE]Originally posted by xlacrosse
[. The TQ stayed around 279lbs.

that's a lot of torque to the rear wheels

 

yes it sure is, the photo isnt loading, so I cant do the calculation by hand useing rpm and hp data.

but 279 is not correct... dont mean to burst your bubble, the 244 is great, but the 279 is an obvious operator error, Id go back to the dyno shop and demand another pull cause they screwed up.

 

I thought this car comes with 270 ft lbs of torque at the CRANK

 

What kind of dyno????????

 

it was a DynoJet
The run was done in Woodside Queens at DTR Inc.

I may be wrong with the torque #'s but that is what i recall being on the screen. The printout he gave me was only a HP to Speed Graph and does not display the TQ #'s

Next time i go back im going to confirm the TQ #'s and have him produce me a HP to RPM chart.

 

Your car produced more torque on the dyno the the car has.

 

Torque might be underrated which wouldnt suprise me from Nissan, I know for a fact that several 02/03 Maximas have dynoed at 265+ in the torque and were rated at 246. Several guys had documentation.

 

Probably not underrated by that much.

 

Maxima is fwd and it has less hp and tq loss but on the other side Nissan overatted the Maxima apperrently has the same hp to the wheel as the Altima 2002 and 2003. What year Max are you talkng about 03 or 04?

 

Huh? That's weird or it's operator error. My stock 2K2 auto Maxima on a Dynojet duno get 195.1 hp and 214.7 lb-ft of torque.