My first real photo shoot....
#26
Registered User
iTrader: (5)
Join Date: Nov 2008
Location: Shreveport, Louisiana
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
Thanks. Yup, ya gotta love the procharger and ya gotta love that sound! Here's where I got the lights for my plates.
http://store.ijdmtoy.com/iJDMTOY-JDM...-p/led_t15.htm
http://store.ijdmtoy.com/iJDMTOY-JDM...-p/led_t15.htm
#31
Registered User
iTrader: (5)
Join Date: Nov 2008
Location: Shreveport, Louisiana
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
The ATI Procharger supercharger was one of the earliest forced induction kits available for the Nissan 350Z and Infiniti G35. Over the last couple of years we've encountered a minor, but consistent, flaw in the design of the ATI Procharger unit. When the pulleys are upgraded, additional stress is placed on the supercharger’s main bracket, causing it to flex. The angle of this flex causes the main belt to shift on the cog pulley under load. The end result of these actions is more rapid wear of the supercharger main belt, premature wear on the kits jackshaft assembly, and a loss of supercharger power and efficiency.
The AAM Competition Supercharger Flex Brace is the solution to this problem. Preliminary testing has show the AAM Comp Supercharger Flex Brace significantly reduces this flex and helps maintain belt longevity and supercharger power output. Constructed from the highest quality billet aluminum, the AAM Competition Supercharger Flex Brace can be used with Nissan 350Z and Infiniti G35 vehicles equipped with an ATI Procharger unit.
Note: A properly functioning jackshaft bearing greatly increases the effectiveness of the AAM Supercharger Brace. We will be working with Procharger to provide the best possible pricing for new jackshaft assemblies for those whose bearings have prematurely worn or those who have old units which are in need of fresh components.
For further information and pricing, feel free to give us a call at the shop, PM me or e-mail me at ClintonM@alteredatmosphere.com or Sales@alteredatmosphere.com
Recommended install time: 3 hours
In-Stock
BEFORE BRACE:
WITH THE AAM BRACE
The AAM Competition Supercharger Flex Brace is the solution to this problem. Preliminary testing has show the AAM Comp Supercharger Flex Brace significantly reduces this flex and helps maintain belt longevity and supercharger power output. Constructed from the highest quality billet aluminum, the AAM Competition Supercharger Flex Brace can be used with Nissan 350Z and Infiniti G35 vehicles equipped with an ATI Procharger unit.
Note: A properly functioning jackshaft bearing greatly increases the effectiveness of the AAM Supercharger Brace. We will be working with Procharger to provide the best possible pricing for new jackshaft assemblies for those whose bearings have prematurely worn or those who have old units which are in need of fresh components.
For further information and pricing, feel free to give us a call at the shop, PM me or e-mail me at ClintonM@alteredatmosphere.com or Sales@alteredatmosphere.com
Recommended install time: 3 hours
In-Stock
BEFORE BRACE:
WITH THE AAM BRACE
Last edited by Boostedtrack350; 10-09-2009 at 08:12 AM.
#33
Registered User
iTrader: (5)
Join Date: Nov 2008
Location: Shreveport, Louisiana
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
At 10psi I'm making 400whp but thats on a low compression built motor. Stock block should be a little more. I plan on bracing up the ATI even more and try and turn it up to about 15psi.
Thread
Thread Starter
Forum
Replies
Last Post
Tochigi_236
Feedback & Suggestions for Our Forum
8
09-27-2015 03:40 PM
aam, az, boostedtrack350, car, coupon, gilbert, ijdmtoy, import, interesting, parts, photo, photoshoot, pro, shoot, spots