My 05 g35 coupe stalled twice on the same incline comming off the freeway within 2 months apart. Car died as I rolled up 40mph to the light and car died but lights and radio stayed on lights check engine, oil logo, and battery logo light came on. The car started up right away no problem and all warning lights went away. The car has 58,000 miles manual transmission. I'd like help on this if possible; thanks in advance. I replaced the throttle body because that was bogging and would die 4 months ago diagnosed the problem with the scanner. Runs perfect besides the two recent incidences (I run the diagnostic scanner and no codes perhaps due to me starting the car back up to get home it clears the lights right after starting)

 

My 05 g35 coupe stalled twice on the same incline comming off the freeway within 2 months apart. Car died as I rolled up 40mph to the light and car died but lights and radio stayed on lights check engine, oil logo, and battery logo light came on. The car started up right away no problem and all warning lights went away. The car has 58,000 miles manual transmission. I'd like help on this if possible; thanks in advance. I replaced the throttle body because that was bogging and would die 4 months ago diagnosed the problem with the scanner. Runs perfect besides the two recent incidences (I run the diagnostic scanner and no codes perhaps due to me starting the car back up to get home it clears the lights right after starting)

 

After replacing the throttle body have you done the re-learn?

 

are you sure you know how to drive a standard....... just sayin

 

why do people post the same thing in two different places.....

https://my350z.com/forum/g35-g37/600...preciated.html

 

My Battery terminals once got loose and my Z would stall - loose power when coming to a stop. I popped the hood and noticed a loose connection I then slapped in a bolt in the small opening drove home then tightened terminals and all was back to normal. Same thing used to happen in one of my old beaters. Not sure how it became loose in the Z but it did!