vdc issue
02-05-2008, 02:43 PM
#1
Registered User
Thread Starter
Join Date: Mar 2007
Location: miami
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
vdc issue
hey guys well i went to go get my a arms put in today and when it got out of alignment i felt a knock when i hit the breaks and then the VDC ABS RAS and my slip light were all lit up does anyone know whats going on or whats causing it thanks
02-05-2008, 03:18 PM
#5
Registered User
Join Date: Nov 2007
Location: SoCal
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
I experienced the same thing when I installed my HFC's. Ultimately took the car to have aligned which remedied the problem when they reset the steering angle sensor. Not a big problem.
This may a tough one since you appear to need a dealer Consult III to pull codes related to this system. While looking in SM it struck me that something may have happened to steering angle sensor since this is located in column and is part of that system. Check out chapter called "BRC" in SM.
SM can be downloaded here:
http://www.vq35de.com/ESM/Infiniti/G35-G37/
Extract with WinRAR:
http://www.rarlab.com/download.htm
Wish I had a more clearcut answer for you.
It may also be that this needs to be performed:
ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION on page BRC-8
Not sure how invasive they were on console but if sensor was removed it apparently has to go through this calibration with the Consult III
This may a tough one since you appear to need a dealer Consult III to pull codes related to this system. While looking in SM it struck me that something may have happened to steering angle sensor since this is located in column and is part of that system. Check out chapter called "BRC" in SM.
SM can be downloaded here:
http://www.vq35de.com/ESM/Infiniti/G35-G37/
Extract with WinRAR:
http://www.rarlab.com/download.htm
Wish I had a more clearcut answer for you.
It may also be that this needs to be performed:
ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION on page BRC-8
Not sure how invasive they were on console but if sensor was removed it apparently has to go through this calibration with the Consult III
02-05-2008, 06:33 PM
#6
Registered User
Thread Starter
Join Date: Mar 2007
Location: miami
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SoCal Piliguy
I experienced the same thing when I installed my HFC's. Ultimately took the car to have aligned which remedied the problem when they reset the steering angle sensor. Not a big problem.
This may a tough one since you appear to need a dealer Consult III to pull codes related to this system. While looking in SM it struck me that something may have happened to steering angle sensor since this is located in column and is part of that system. Check out chapter called "BRC" in SM.
SM can be downloaded here:
http://www.vq35de.com/ESM/Infiniti/G35-G37/
Extract with WinRAR:
http://www.rarlab.com/download.htm
Wish I had a more clearcut answer for you.
It may also be that this needs to be performed:
ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION on page BRC-8
Not sure how invasive they were on console but if sensor was removed it apparently has to go through this calibration with the Consult III
This may a tough one since you appear to need a dealer Consult III to pull codes related to this system. While looking in SM it struck me that something may have happened to steering angle sensor since this is located in column and is part of that system. Check out chapter called "BRC" in SM.
SM can be downloaded here:
http://www.vq35de.com/ESM/Infiniti/G35-G37/
Extract with WinRAR:
http://www.rarlab.com/download.htm
Wish I had a more clearcut answer for you.
It may also be that this needs to be performed:
ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION on page BRC-8
Not sure how invasive they were on console but if sensor was removed it apparently has to go through this calibration with the Consult III
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM
