Motordyne Engineering plenum spacer dyno test vs Crawford V5
#62
Registered User
iTrader: (2)
Join Date: Feb 2004
Location: Oviedo, FL
Posts: 541
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 2003z
actually the bolt head will break off, you won't strip the threads in the lower plenum.
actually the bolt head will break off, you won't strip the threads in the lower plenum.
Odds are the steel bolt was installed incorrectly or it was just installed one too many times. There is a reason steel inserts were created and this is it.
#63
Registered User
iTrader: (18)
Join Date: Jan 2005
Location: AZ
Posts: 1,686
Likes: 0
Received 0 Likes
on
0 Posts
I was considering this product and finally got a price quote from Motordyne. At first I was thinking $200 wouldnt be so bad. But was rethinking it and I dont really think its worth $200. Considering, how much does this prodcut really cost to make? I'm going to order my Crawford Plenum instead. The spacers have yet to be proven with Forced Induction and that is my future goal.
Good Luck guys.
Good Luck guys.
#64
Registered User
iTrader: (2)
Join Date: Oct 2004
Location: San Diego, CA
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by JisNis
I was considering this product and finally got a price quote from Motordyne. At first I was thinking $200 wouldnt be so bad. But was rethinking it and I dont really think its worth $200. Considering, how much does this prodcut really cost to make? I'm going to order my Crawford Plenum instead. The spacers have yet to be proven with Forced Induction and that is my future goal.
Good Luck guys.
I was considering this product and finally got a price quote from Motordyne. At first I was thinking $200 wouldnt be so bad. But was rethinking it and I dont really think its worth $200. Considering, how much does this prodcut really cost to make? I'm going to order my Crawford Plenum instead. The spacers have yet to be proven with Forced Induction and that is my future goal.
Good Luck guys.
http://g35driver.com/forums/showthread.php?t=42357
1/4" spacer for $146 (fits stock 350Z WITH strut bar)
3/8" spacer for $161 (fits stock G35 with no modification to engine cover)
1/2" spacer for $184 (bigger is better? =)
These are prices based on having at least 15 buyers and there are currently ~35, so they may drop even more.
Hydrazine extended it two weeks out so several individuals can have a chance to do their own dyno testing and give everyone even more objective feedback. I signed up to lock in a very reasonable price while I wait for more results before plunking down the cash...
#65
Registered User
Join Date: Dec 2002
Location: portland
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by copba1t
There is a group buy on G35Driver right now that ends on 2/14:
http://g35driver.com/forums/showthread.php?t=42357
1/4" spacer for $146 (fits stock 350Z WITH strut bar)
3/8" spacer for $161 (fits stock G35 with no modification to engine cover)
1/2" spacer for $184 (bigger is better? =)
These are prices based on having at least 15 buyers and there are currently ~35, so they may drop even more.
Hydrazine extended it two weeks out so several individuals can have a chance to do their own dyno testing and give everyone even more objective feedback. I signed up to lock in a very reasonable price while I wait for more results before plunking down the cash...
There is a group buy on G35Driver right now that ends on 2/14:
http://g35driver.com/forums/showthread.php?t=42357
1/4" spacer for $146 (fits stock 350Z WITH strut bar)
3/8" spacer for $161 (fits stock G35 with no modification to engine cover)
1/2" spacer for $184 (bigger is better? =)
These are prices based on having at least 15 buyers and there are currently ~35, so they may drop even more.
Hydrazine extended it two weeks out so several individuals can have a chance to do their own dyno testing and give everyone even more objective feedback. I signed up to lock in a very reasonable price while I wait for more results before plunking down the cash...
#66
Registered User
iTrader: (2)
Join Date: Oct 2004
Location: San Diego, CA
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 03daytonablue
The 1/2" spacer will fit the 350Z minus the engine cover and strut bar? It does clear the hood?
The 1/2" spacer will fit the 350Z minus the engine cover and strut bar? It does clear the hood?
http://g35driver.com/forums/showpost...9&postcount=14
Thread
Thread Starter
Forum
Replies
Last Post
ars88
Zs & Gs For Sale
18
04-04-2016 07:52 AM