Brandon@Forged

temp. removed.

Brandon@Forged

Intake Filters
Jim Wolf Technology (JWT) Popcharger Intake Filter
K&N Drop-In Intake Filter
Nismo S-Tune Intake Filter


Cold-Air Intakes
A-Spec Cold-Air Intake
Advanced Engine Management (AEM) Cold-Air Intake
GruppeM Cold-Air Intake
Injen Cold-Air Intake
K&N Typhoon Cold-Air Intake
NISMO R[ace]-Tune Cold-Air Intake


Short-Ram Intakes
AFE Magnum Force Short-Ram Intake
Blitz Carbon Suction Short-Ram Intake
Blitz Power SUS Short-Ram Intake
HKS Racing Suction Short-Ram Intake
K&N Aircharger Short-Ram Intake




Intake Piping
Unlimited Tuning-Revolution (UT-R) Air Intake Tube


Throttle Bodys
350EVO
Proflow


High-Flow Catalytic-Converters
Crawford High-Flow Catalytic Converters
Nismo R-Tune High-Flow Catalytic-Converters
Power Enterprise (PE) High-Flow Catalytic-Converters
Random Technology High-Flow Catalytic-Converters
Ultimate Racing High-Flow Catalytic-Converters


Test Pipes
Nexus Test Pipes
Kinetix Test Pipes
Megan Racing Test Pipes
Ultimate Racing Test Pipes



Y-Pipes
Unlimited Tuning-Revolution (UT-R) Y-Pipe


Y-Pipe-Back Exhausts



True-Dual Exhausts
Stillen True-Dual Cat-Back Exhaust
Borla True-Dual Cat-Back Exhaust
Injen True-Dual Cat-Back Exhaust


Upper Intake Plenums
Crawford Cast Upper Intake Plenum
Kinetix Racing V[ersion]4 Upper Intake Plenum
Air Power Systems (APS) Tallboy Upper Intake Plenum


Lower Intake Plenums
Esprit Lower Intake Plenum


Intake Plenum Spacers
Altered Atmosphere [Motorsports] Intake Plenum Spacer
Motordyne Engineering Intake Plenum Spacer


Headers
Crawford
Xerd
350EVO
Nexus
Alphawerks
DC Sports
Megan Racing



Intake Manifolds
Kinetix Racing SSV Intake Manifold
Air Power Systems (APS) Intake Manifold
350EVO Intake Manifold
SSR-Engineering/Speed Force Racing (SFR) Intake Manifold

Brandon@Forged

...

Brandon@Forged

...

ReavTek

iTrader: (1)

I believe MIAPLAYA told me he got the Apex'i WS2 for $480 shipped! I remember it because it blew my mind on what a great value it was. Also, I think the WS2 only has stainless steel tips with the rest of the system being mild steel with a special, rust resistant coating.

As for my info... Tanabe SMR (Super Racing Medallion)
Got it from Options Auto Salon www.optauto.com
Sound:

Loudness: Very Loud, but deep bassy note. Test Pipes will increase loudness. Only equal I can think of is the RS-R, this is definetly not for the faint of heart.

Workmanship:

Unparalled, quality is fantastic and welds are impecable. Bolts on perfectly with no fuss or fitment issues. Tips have a very nice shine and are marked with Tanabe Logo plate and Serial #.

If you need pics please PM me, I'll be happy to provide.

frostyrock7c

iTrader: (4)

Anyone have an exhaust clip of the Invidia N-1? Preferrably with test pipes?

Nitrouz

iTrader: (27)

for Canadians, try Juan at Lightspeed Innovations in Calgary, Alberta. Its a large facility. They can get almost any JDM part as well as USDM parts at the most competitive prices. Very very nice to deal with. Just say Alex from Vancouver with the 350Z sent you. (yea I know that's long, but he has a LARGE customer base...and this can get you a little discount too.)

http://www.lightspeedinnovations.com/main.epl

hbm21rx

Performance Import Trends exhaust, P.I.T. For those that just want a good sounding muffler, 450 shipped. Y-Pipe back exhaust, Stainless steel.

Road Warrior

iTrader: (16)

please note that the next gear gaskets will cause hood clearance issues if you are running the crawford cast plenum. your hood will bulge out where the plenum and hood are making contact. this is the case if you install both the lower and upper gaskets....may be different if you just install the upper or lower. i bought mine as a set and i don't know if you can buy the upper and lower seperately.

i am not sure if this would be a problem with plenum spacers or other intake manifolds.

the next gear gaskets are very thick and one should take this into consideration before installing or purchasing this item.

on a side note, the gaskets are of great quality and do a very good job in reducing the plenum temps.

Brandon@Forged

This post is reserved for information.

Brandon@Forged

This post is reserved for information.

Brandon@Forged

This post is reserved for information.

Brandon@Forged

This post is reserved for information.














Exhaust.. Apexi World Sport 2. Y pipe back ~$589 from board vendors. Pics locates at http://members.***.net/w.suarez/z.htm
Sound clips at http://members.***.net/w.suarez/videos.htm

2 3/4" titanium coated midpipe with SS resonator. Single muffler with dual 4 " tips...





Want to get rid of the SES light from removing your cats?
I have been getting some PMs in regards to MIL eliminators and getting rid of the SES light due to testpipes and the removal of the stock cats. So, here are a couple options that I know have been successful on other cars and are cheap and easy to install:


MIL Eliminators:
Here's a LINK to where I get mine.

I have used them on other cars of mine, but haven't driven them installed on the Z yet, but I am 99% confident they work.

Follow the intall for the ford vehicles that comes with the set as the wiring for our o2 sensors are the same.


If you don't want to cut/splice wires, here is another option to trick the ECU that I picked up from my MSP buddy's website:


LINK

Shortened version:
"i just went and got the HELP! Spark plug non fouler. Part 42002 for 3.99 from autozone.
Its a 2 pack, that you screw together, and then screw the open end into the o2, and the other into the bung.
I'm going to be getting this done tomorrow.
This does require that you drill out the hole to allow for more flow to the o2, but thats pretty easy."
--zivman

Brandon@Forged

This post is reserved for information.















Credit to:
Me
MIAPLAYA
hbm21rx
zivman

Brandon@Forged

This post is reserved for information.

• Intake options:

1. Cold-Air Intake
2. Short-Ram Intake
3. Intake Filter with heatshield

Cold-Air Intakes:
Injen
AEM

Short-Ram Intakes:
K&N





Opinions/testimonials
Polished bent tubing and filter roughly 60 dollars
--hbm21rx

Brandon@Forged

This post is reserved for information.














The way this will work is:
You post your information. I will take your information and add it to the list and give you credit, and then delete your post.

PLEASE FOLLOW THESE RULES CORRECTLY!!!

Brandon@Forged

This post is reserved for information.

Brandon@Forged

This post is reserved for information.

Brandon@Forged

This post is reserved for information.

Brandon@Forged

This post is reserved for information.