** NEW INTAKE MANIFOLD ** long awaited, with pics
04-17-2005, 02:20 PM
#201
Originally Posted by zman1910
Holy moly!! count me in on this group buy when its out!! 
Im getting the APS T also...Will this work well with it? Im sure its been asked but I dont want to go through all those pages...Also is install just as easy as the normal upper plenums?
Im getting the APS T also...Will this work well with it?
Im sure its been asked but I dont want to go through all those pages...Also is install just as easy as the normal upper plenums?
04-17-2005, 02:47 PM
#203
Registered User
Join Date: Jul 2003
Location: Albuquerque, New Mexico
Posts: 1,671
Likes: 0
Received 0 Likes
on
0 Posts
I believe lsdunique has had some discussion with TS on ECU Flash. I know with the Vortech SC I was able to do only the "Limited Flash" which included 100 Throttle, Rev Limit 7100 and remove Speed Limiter. Also, I increase injectors to 380 and returned to ECU for PE 380 Injectors.
Let me throw some more pics. Had NO problem with the OEM Strut. On the driver's side, at stock adjustment, there was 1/2" clearance. Passenger side, 3/16" clearance. I know that is more than what we had with Kinetix V4 and probably OEM Plenums.
Let me throw some more pics. Had NO problem with the OEM Strut. On the driver's side, at stock adjustment, there was 1/2" clearance. Passenger side, 3/16" clearance. I know that is more than what we had with Kinetix V4 and probably OEM Plenums.
04-17-2005, 03:55 PM
#206
official weight in stainless?
I could guess but I have no idea what wall thickness your using.
Naturally I would say that stainless is harder to cure heat soak inbetween passes or runs... but since its just sheetmetal with plenty of surrounding airflow versus the stock brick of cast aluminum with no airflow around it... it might be just as good or better at shedding heat.
ok, im ready to play with one of these and come up with a hands on evaluation. Where do I send the money?
I could guess but I have no idea what wall thickness your using.
Naturally I would say that stainless is harder to cure heat soak inbetween passes or runs... but since its just sheetmetal with plenty of surrounding airflow versus the stock brick of cast aluminum with no airflow around it... it might be just as good or better at shedding heat.
ok, im ready to play with one of these and come up with a hands on evaluation. Where do I send the money?
04-17-2005, 04:03 PM
#207
Registered User
Join Date: Jul 2003
Location: Albuquerque, New Mexico
Posts: 1,671
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by phunk
official weight in stainless?
I could guess but I have no idea what wall thickness your using.
Naturally I would say that stainless is harder to cure heat soak inbetween passes or runs... but since its just sheetmetal with plenty of surrounding airflow versus the stock brick of cast aluminum with no airflow around it... it might be just as good or better at shedding heat.
ok, im ready to play with one of these and come up with a hands on evaluation. Where do I send the money?
I could guess but I have no idea what wall thickness your using.
Naturally I would say that stainless is harder to cure heat soak inbetween passes or runs... but since its just sheetmetal with plenty of surrounding airflow versus the stock brick of cast aluminum with no airflow around it... it might be just as good or better at shedding heat.
ok, im ready to play with one of these and come up with a hands on evaluation. Where do I send the money?
04-17-2005, 04:23 PM
#209
As stated previously, I will be hosting a GB on this within the coming week or 2. I will post all necessary info as soon as Robert and I work out all the details of how the GB will go. This will happen after NA numbers are released and pix of the engine cover are finalized.
Zach
Off Suject: Charles, whats the status of the CAS wires? I saw you got all the stuff finally and was wondering when they would start shipping!!
Zach
Off Suject: Charles, whats the status of the CAS wires? I saw you got all the stuff finally and was wondering when they would start shipping!!
04-17-2005, 04:28 PM
#210
Registered User
Join Date: Nov 2002
Location: Ottawa
Posts: 585
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by zachcrosen
As stated previously, I will be hosting a GB on this within the coming week or 2. I will post all necessary info as soon as Robert and I work out all the details of how the GB will go. This will happen after NA numbers are released and pix of the engine cover are finalized.
Zach
Off Suject: Charles, whats the status of the CAS wires? I saw you got all the stuff finally and was wondering when they would start shipping!!
Zach
Off Suject: Charles, whats the status of the CAS wires? I saw you got all the stuff finally and was wondering when they would start shipping!!
Group buys for premier member's only i assmue?
04-17-2005, 04:33 PM
#211
Registered User
iTrader: (1)
Join Date: Jun 2004
Location: Naples,Fl
Posts: 630
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by zachcrosen
As stated previously, I will be hosting a GB on this within the coming week or 2. I will post all necessary info as soon as Robert and I work out all the details of how the GB will go. This will happen after NA numbers are released and pix of the engine cover are finalized.
Zach
Off Suject: Charles, whats the status of the CAS wires? I saw you got all the stuff finally and was wondering when they would start shipping!!
Zach
Off Suject: Charles, whats the status of the CAS wires? I saw you got all the stuff finally and was wondering when they would start shipping!!
ok....
so how bout you take my money and give me the intake manifold? seriously, can i just order this plenum now- before the GB- rather than wait (i know the GB price will be cheaper, but i want one NOW.)?
john
04-17-2005, 04:36 PM
#213
Sponsor
Forged Internals.com
Forged Internals.com
Originally Posted by SkyMan
Group buys for premier member's only i assmue?
04-17-2005, 04:36 PM
#214
Sponsor
Forged Internals.com
Forged Internals.com
Zach, you need to PM me when you do the group buy with the link, i'll move it to the vendor forum and I can even keep track of it and update the title and first post and etc. if you need.
let me know. and bar if you want.
