What are your mods?

 

Does anybody have any ideas about the gains with the throttle body and FI?

 

with a blower i would say around 10 rwhp, i will call doug tomorrow and ask him for you.

 

And this was on a dynojet????

 

Called Doug to find more info on this throttle body. Its a stock oem throttle body bored out to I think 73mm. Install may recquire the techno square gas pedal reset for some models. Not sure of the gains with FI, but Doug did dyno a car with the throttle body and cams. It made 5HP.

 

I am pretty sure that cam timing can not be done with the TS but with the EU. I will bring shariff in on this one, the EU/VQ master will set it straight.

 

I gained between 5-7 horse power at different places with the throttle body . . .and to think I did not really want it when doug told me to try it. I installed it with the car strapped to the dyno . . .needless to say I still have it on the car. I would not expect these gains on a non cammed car, as others have done this and seen only faster lap times but no real power on dyno.

Technosquare can adjust cam timing (as that is what I have been doing with my ECU the past 3 reflashes), while emanage ultimate cant at this time. AFAIK, MoTeC is the only computer that can fully control Nissans VCT.

 

It was a dyna pack dyno the 3000 model

 

Ok, dont dynopacks read higher then most?

 

no they read the lowest actually! the chassi dynos read lower than a mustang dyno!
It's not hard to get 285 N/A look at my mod list you can do it to.

 

the emanage ultimate can't adjust cam timing?

is that different from normal timing cause Sharif is saying greddy's latest firmware lets you advance timing

 

Yes, it is different. I cannot explain how, but it is. You can advance and retard ignition timing with the Emanage Ultimate.

 

damn i need to go get my car up to par.... definitely a lot of good information on this one thread

 

I have never seen a Z get 285rwhp with your mods. The only ones that I have seen that are that high are ones with cams.

 

They emanage helped me the most, it added 15 rwhp, the headers added 15, thats thrity right there minus all of my other mods! the headers plenum and cats alone add 20-40 hp

 

I have a G35 Coupe. Where can I get a greddy emanage fuel comp?
I'm also thinking about doing cams after I get my Stillen headers.

Thanks,

Jeff

 

You can get the emanage anywhere, i would buy from intense motor sports they are a sponsor here great to work with and great prices!

 

Get the Emanage from Forged Internals. Sharif is a subject matter expert, when it come to the Emanage Ultimate. Hands down. He will meet any price, too.