Motordyne Iso Thermal Plenum Spacers
#61
Originally Posted by taurran
I really would like to know if this works on any of the veilside/seibonvt style hoods with a strut bar spacer of any sort. From what someone on these forums explained, the 5/16" spacer with strut spacers won't fit with this hood and the stock strut. If that's the case, I might as well just go without a strut and run the 1/2". I'm concerned with the difference in gains between the 5/16" and the 1/2" plenum spacers to see if this is something I will bother trying...
Also, I'm wondering if the JIC strut bar might work with the hood and the 5/16" spacer. The JIC struts seem to be a bit flatter than the stock bar, perhaps it would fit...
Also, I'm wondering if the JIC strut bar might work with the hood and the 5/16" spacer. The JIC struts seem to be a bit flatter than the stock bar, perhaps it would fit...
I did a search but couldn't find any information on 5/16" strutbar spacers with the hoods. Where did you find it?
#62
Originally Posted by 350zDCalb
hydrazine...so what is the difference (hypothestically) from the 5/16 vs 1/2
i want to have a strut tower bar and i don't want hood spacers
i want to have a strut tower bar and i don't want hood spacers
Most of the gains come within the first 1/4". And there are rapidly diminishing returns beyond 1/4".
The 1/2" does provide higher peak numbers, but only by about 1 to 1.5 HP. With either spacer, you will be much better off than stock.
Last edited by Hydrazine; 09-19-2005 at 07:19 AM.
#63
Originally Posted by jct
Tony:
If I understand this, the Iso Thermal plenum internal supports would be the height of the plenum spacer, either 5/16 or 1/2 inch. If that is correct, will you be offering Iso Thermal plenum internal supports for those of us (at least 200) who purchased your 1/4 inch plenum spacer?
If I understand this, the Iso Thermal plenum internal supports would be the height of the plenum spacer, either 5/16 or 1/2 inch. If that is correct, will you be offering Iso Thermal plenum internal supports for those of us (at least 200) who purchased your 1/4 inch plenum spacer?
1/4", 5/16", 3/8" and 1/2".
#64
Registered User
iTrader: (11)
Join Date: Sep 2004
Location: Palm Springs
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Hydrazine
I have Iso Thermal internal plenum supports of all sizes in anticipation of just that!
1/4", 5/16", 3/8" and 1/2".
1/4", 5/16", 3/8" and 1/2".
#65
Registered User
iTrader: (3)
Join Date: Jul 2003
Location: Escondido
Posts: 11,373
Likes: 0
Received 0 Likes
on
0 Posts
Well I would be happy to do before and after dynos. I will talk to Turbonetics as my car should be back up there soon and see if they are willing to do before and afters for me. FYI they have a Dynapack dyno there.
#67
350Z-holic
iTrader: (26)
Originally Posted by anotheraznguy
so when do we order?
https://my350z.com/forum/showpost.ph...9&postcount=21
#68
Originally Posted by MIAPLAYA
FYI they have a Dynapack dyno there.
#69
Originally Posted by anotheraznguy
so when do we order?
I'm making preparations for the GB now. There is always a ton of work involved with doing a GB. I had to limit the last GB to 100 units because the work load is so huge.
I don't expect this one to go to 100 but I still want to be prepared.
#70
Registered User
iTrader: (3)
Join Date: Jul 2003
Location: Escondido
Posts: 11,373
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Hydrazine
That's awesome! I didn't know there was a Dynapack anywhere local to my area. TN should be advertising that all over the place. They offer dyno services right? I've been driving hours just to make it to the nearest Dynapack. Now I'm really gonna have to see their facility.
#72
New Member
iTrader: (12)
Wow I'm so glad I live in CA and don't have to worry about it. It was a fun read and I learned some stuff though...
Will The Motordyne XL STB and Hood spacer kit is $40 work with the new spacer and stock strut bar?
OK any of you out there that have the 1/2 spacer with the hood modification, please tell me how you like it. Does the hood still function the same? Pros and Cons besides everyone telling me my hood is open???
Will The Motordyne XL STB and Hood spacer kit is $40 work with the new spacer and stock strut bar?
OK any of you out there that have the 1/2 spacer with the hood modification, please tell me how you like it. Does the hood still function the same? Pros and Cons besides everyone telling me my hood is open???
Last edited by corsair; 09-19-2005 at 01:14 PM.
#73
Registered User
iTrader: (18)
Join Date: Oct 2004
Location: .
Posts: 9,482
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by VeilsideZ33
i got the spacer... the coolest part was the pen it came with! =)
j.k. the gains are noticeable
j.k. the gains are noticeable
#74
Registered User
iTrader: (18)
Join Date: Oct 2004
Location: .
Posts: 9,482
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Hydrazine
Taurran,
I did a search but couldn't find any information on 5/16" strutbar spacers with the hoods. Where did you find it?
I did a search but couldn't find any information on 5/16" strutbar spacers with the hoods. Where did you find it?
#78
Originally Posted by taurran
I'm going with the Veilside hood, which is pretty much the same as his Seibon hood, and am afraid I'll have the same problem. If that's the case and I won't be able to retain the strut bar with the 5/16", I might as well go with the 1/2" right?
I know 1/2" fit under Zboys vented carbon hood.