My exhaust is installed! :D
Thread Starter
Registered User
iTrader: (13)
Joined: May 2004
Posts: 6,002
Likes: 0
From: Ontario, Canada
Got my Blitz Nur-Spec Touring installed, looks and sounds great! Didn't really feel any gains though. Tho I did install the MD spacer right after on the same day.
pics:



Does anyone know how to make Hanger Adjustments so that the passenger side isn't so close to the bumper? It's slightly lob-sided right now.
pics:



Does anyone know how to make Hanger Adjustments so that the passenger side isn't so close to the bumper? It's slightly lob-sided right now.
Originally Posted by noodleman
Does anyone know how to make Hanger Adjustments so that the passenger side isn't so close to the bumper? It's slightly lob-sided right now.
BTW sound clips please
Trending Topics
Cool pics, the tips look a lot like Fujitsubo
Your exhaust was probably already like that, you just didn't notice until now. My stock exhaust is not 100% straight. In any case, you can fiddle with the hangers by bending or adding washers or something if you REALLY want.
Originally Posted by noodleman
Does anyone know how to make Hanger Adjustments so that the passenger side isn't so close to the bumper? It's slightly lob-sided right now.
Thread Starter
Registered User
iTrader: (13)
Joined: May 2004
Posts: 6,002
Likes: 0
From: Ontario, Canada
thanks for the props! I'll try to make some sound clips later on!
I noticed that the stock exhaust already uneven to begin with, it's just slightly annoying...i guess i can live with it. If i find some time i'll try to fiddle around with the hangers.
yea, it's more of a show exhaust than anything. The specs for the exhaust is as follows:
70mm piping, 114.3mm tips (so roughly 2.75" piping and 4.5" tips).
Like the Fujitsubo exhaust, it's midpipe + muffler only, so i never expected much gains anyways. I bought it more for another upcoming goodie that i'm waiting to get shipped to me...
I noticed that the stock exhaust already uneven to begin with, it's just slightly annoying...i guess i can live with it. If i find some time i'll try to fiddle around with the hangers.
yea, it's more of a show exhaust than anything. The specs for the exhaust is as follows:
70mm piping, 114.3mm tips (so roughly 2.75" piping and 4.5" tips).
Like the Fujitsubo exhaust, it's midpipe + muffler only, so i never expected much gains anyways. I bought it more for another upcoming goodie that i'm waiting to get shipped to me...
Thread Starter
Registered User
iTrader: (13)
Joined: May 2004
Posts: 6,002
Likes: 0
From: Ontario, Canada
As promised, some clips via a crappy ancient camera.
Inside an indoor parking garage, start up + rev

Inside an indoor parking garage, rev from outside (sorry for the short clip)

Here's a clip from the cabin, from a stop light. I forgot to take it pass 5k rpm.

I'm going to try and make better clips, possible borrowing some better camera than this one.
The breathing mods that I did to this car are: JWT Popcharger, MD 5/16 spacer (ISO), and the Blitz Exhaust.
Enjoy!
Inside an indoor parking garage, start up + rev

Inside an indoor parking garage, rev from outside (sorry for the short clip)

Here's a clip from the cabin, from a stop light. I forgot to take it pass 5k rpm.

I'm going to try and make better clips, possible borrowing some better camera than this one.
The breathing mods that I did to this car are: JWT Popcharger, MD 5/16 spacer (ISO), and the Blitz Exhaust.
Enjoy!



