Will it fit? The guys from Motordyne aren't responding to me and I can't seem to find much searching.

 

it'll work....

 

Awesome, thanks for the quick response!

 

i'm sure the spacer will fit, but the bolt kit might be slightly different? Might want to check with tony.

 

will work all the same!

 

nope...it'll work.

 

1 vq35de engine = 1 vq35de engine

 

my vq35de engine > everyone elses!

 

It should fit without any problems. We have the Z1 Plenum spacer on our G35.

 

Yes, it will fit if its a 1/2" spacer.
If its a 5/16" spacer, you will need the strut bar spacer.

When did you try to contact us? I'm, almost, always available.
(661) 993-5111

Tony

PS - If you were the one asking the question about M10 bolts with the 1.25 thread pitch, I just came across your email today. My direct email is info@motordyneengineering.com

Otherwise, yes, M10@1.25 thread pitch should fit. If it didn't, check to make sure you have the same thread pitch as the stock bolts.

Bring a stock bolt with you to the hardware store and simply get the exact same size bolt 30mm long. You can put the stock bolt threads up against the new bolt and they should fit together perfectly (assuming they are the same pitch).

Call me if you have any questions.

 

you responded to my email about 15 minutes after I posted the thread. Thanks for the info man. The spacer should be getting in on the 11th, so probably the next weekend I will try to install it.