When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just a little heads up guys, we have got stainless steel test pipes in stock for the 370Z now. We test fit a set last week and are ready to go with them.
Original Stock Baseline Pull 100% Stock 50 Miles
The "hiccup" in the baseline pull was due to a poor connection on the dyno, nothing in regards to the car.
GT motorsports pulled just under 300whp with theirs...
Showed 8 more HP than our dyno run did, but their stock dyno run also showed 7 more HP than ours did. So the real difference is 1 HP. Could be a variance in the dyno, also i can't recall if their car has the sport package or not. The larger rotors and wheels on the sport package will swallow a little bit of power on the dyno.
I wish we could make that kind of number with just test pipes that would be awesome. It's not going to take much to get 300 rwhp out of the 370Z. We're hoping to have the Nismo catback in a few days and going to dyno it and see what happens.
GT motorsports pulled just under 300whp with theirs...
Every dyno is different, another company only dyno'd 258-hp with the 370Z, by comparison, a 350Z on the same type of dyno from the same people baselined 213-hp.
Z1 has two dyno comparisons of the same car on the same dyno, so the results should be considered viable.
Wait so these should also fit the VQ35HR too right? I thought the VQ37HR had the same flange locations as the VQ35HR..because G37 test pipes/HFCs would also fit on HR 350Z's.
Wait so these should also fit the VQ35HR too right? I thought the VQ37HR had the same flange locations as the VQ35HR..because G37 test pipes/HFCs would also fit on HR 350Z's.