You cannot do the mrev2 + kinetix. The kinetix replaces both the upper and lower halves of the stock intake manifold.

The mrev2 replaces the lower half, so you can use that in conjunction with a spacer.

 

Thank you for the info, what if you got the kinetix v+ plenum since it takes the shape of the stock one and added a spacer and mrev2 with it. Is it possible to do all 3 ?

 

Yes that combo would work. The kinetix v+ is just the upper plenum

 

You will most likely have to ditch your strut bar with a spacer and the v+. Both parts add height, and I dont think you can add enough washers to the bar to clear the manifold without hitting the hood.

Better off just going with the mrev2 and spacer, I seem to remember posts about some people having issues with the plastic manifold warping causing vacuum leaks and throwing codes.

 

Ok so my choice is between mrev2 + spacer or velocity manifold. I want which ever will be better for the supercharger gain wise.

 

The velocity manifold you would see better gains since it's not restrictive at all.