$60 shipped or $50 picked up

So here's the story: I bought this used, and the seller didn't include the 4 small bolts that connect the filter/venturi ring to the MAF. Since they weren't included, I assumed I was supposed to reuse the stock bolts. However the stock ones are too long and 2 broke off as I was attempting to tighten them down, not realizing I was doing anything wrong. Not having any way to attach the filter or OEM airbox, I found another popcharger on craigslist and bought it that night. I've been told you could weld something to the broken bolts in order to get them out. All I've tried is turning them with vice grips, but there's just not enough to grip on to. I don't think the threads are stripped since they broke off pretty easily.

Included is everything you need except the 4 bolts to connect the filter to the MAF (filter, venturi ring, heat shield, stabilizing arm/screws, and original instructions). PM me or text me at 931-580-7036.

 

Bump

 

Just my 2 cents, take a Dremel tool and use a cutting wheel to cut a slot in the screw shaft; then use a flat blade screw driver to remove.

 

SOLD