Notices
Maintenance & Repair 350Z up keep and diagnosing/fixing problems

Steering/drifting to the right-tried everything, HELP!

Thread Tools
 
Search this Thread
 
Old Jul 11, 2006 | 02:45 PM
  #1  
350drft's Avatar
350drft
Thread Starter
Registered User
iTrader: (6)
 
Joined: Aug 2005
Posts: 35
Likes: 0
From: Goldens Bridge
Default Steering/drifting to the right-tried everything, HELP!

Basically, the cars steers to to right, so I need to overcorrect the steering wheel to the left to go straight. Below is what the dealership has tried already, PLEASE, any other ideas?!

1) Allignment (2 different shops)
2) Different wheels
3) Different tires
4) Replace front right strut/housing
5) Replace front right suspension copmpression rod.
6) Replace steering knuckle
7) Adjusted steering rack
8) Removed sway bars
9) Took measurements to see if anything in the suspension was bent.
10) Reset steering angle sensor.


What else can we do? The dealership says they're out of ideas, and the keep calling Headquarters and not getting anywhere. What should I do?
Reply
Old Jul 11, 2006 | 02:57 PM
  #2  
showstoppertk's Avatar
showstoppertk
Registered User
iTrader: (6)
 
Joined: Feb 2005
Posts: 1,952
Likes: 1
From: Hawaii
Default

lemon law it man.
Reply
Old Jul 11, 2006 | 04:44 PM
  #3  
Mazinger Z's Avatar
Mazinger Z
New Member
iTrader: (49)
 
Joined: Dec 2005
Posts: 6,712
Likes: 1
From: Los Angeles
Default

wtf...yea i smell lemon lime
Reply
Old Jul 11, 2006 | 06:04 PM
  #4  
350drft's Avatar
350drft
Thread Starter
Registered User
iTrader: (6)
 
Joined: Aug 2005
Posts: 35
Likes: 0
From: Goldens Bridge
Default

I bought it from the dealership a year ago, plus I have a bunch of mods on it(none of which have anything to do with the steering issue), Plus, this only started happening 3-4 monthes ago. What can I still do? As crazy as it sounds, am I entitled to revert the car back to stock and get a new one from the dealer at no extra cost to me? BTW my car is an '03. HELP!
Reply
Old Jul 11, 2006 | 06:26 PM
  #5  
eat rice z33's Avatar
eat rice z33
New Member
iTrader: (11)
 
Joined: Jun 2005
Posts: 1,553
Likes: 2
From: ct
Default

ok you wouldnt happen to have an aftermarket LSD do you?
Reply
Old Jul 12, 2006 | 12:38 PM
  #6  
350drft's Avatar
350drft
Thread Starter
Registered User
iTrader: (6)
 
Joined: Aug 2005
Posts: 35
Likes: 0
From: Goldens Bridge
Default

Nope, stock Track model VLSD in there. Could this be affecting it? I've doe a small share of drifting and auto-xing.
Reply
Old Jul 12, 2006 | 01:42 PM
  #7  
Fluid1's Avatar
Fluid1
Registered User
iTrader: (19)
 
Joined: May 2005
Posts: 11,953
Likes: 0
From: NOPE NOPE NOPE
Default

Drive in the left lane. The crowned road will help you out.
Reply
Old Jul 12, 2006 | 02:10 PM
  #8  
BlackZero6's Avatar
BlackZero6
Registered User
iTrader: (2)
 
Joined: Dec 2005
Posts: 682
Likes: 0
From: Fontana, California
Default

are you sure it isnt following road crown? or is it a really bad pull?
Reply
Old Jul 13, 2006 | 05:29 PM
  #9  
350drft's Avatar
350drft
Thread Starter
Registered User
iTrader: (6)
 
Joined: Aug 2005
Posts: 35
Likes: 0
From: Goldens Bridge
Default

Haha, definatly not the road crown. I wish the pull was that minimal! The dealership has my car as we speak. I have my fingers crossed.
Reply
Old Jul 13, 2006 | 07:50 PM
  #10  
Fluid1's Avatar
Fluid1
Registered User
iTrader: (19)
 
Joined: May 2005
Posts: 11,953
Likes: 0
From: NOPE NOPE NOPE
Default

Originally Posted by 350drft
Haha, definatly not the road crown. I wish the pull was that minimal! The dealership has my car as we speak. I have my fingers crossed.
Good luck. My car's still at the dealer, been there since Sunday night.
Reply
Old Jul 17, 2006 | 10:24 PM
  #11  
350drft's Avatar
350drft
Thread Starter
Registered User
iTrader: (6)
 
Joined: Aug 2005
Posts: 35
Likes: 0
From: Goldens Bridge
Default

FIXED!!!!!!!!!! Dealership took the car down the street to some "old timers" who apparently are real nasty with alignments. Car rides like a dream.
Reply
Old Jul 18, 2006 | 07:07 AM
  #12  
Fluid1's Avatar
Fluid1
Registered User
iTrader: (19)
 
Joined: May 2005
Posts: 11,953
Likes: 0
From: NOPE NOPE NOPE
Default

It was just an alignment issue? Did they add anything, or just use a digital system?
Reply
Old Jul 18, 2006 | 08:36 AM
  #13  
Asterix's Avatar
Asterix
New Member
 
Joined: Oct 2003
Posts: 180
Likes: 0
From: Vienna, VA
Default

Mine did the same thing. The dealer just tweaked the steering wheel center, and didn't seem inclined to fix anything, so I took the car to a shop that I trusted to give me a good alignment. Turns out the thrust angle was off by a wee bit because the rear toe wasn't symmetrical. Sure, everything was within tolerance, but it still pulled. Once the thrust angle was set to 0 by a competent shop, no more pulling for me.

Don't get an alignment at a dealer; go for the independent shop that runs race cars. They'll understand the need for accuracy.

Asterix
Reply
Old Jul 21, 2006 | 10:19 AM
  #14  
jhagan's Avatar
jhagan
Registered User
 
Joined: Mar 2003
Posts: 101
Likes: 0
From: NC
Default

There is a service bulltin on this the dealer doesnt talk about. Se the dealer.
Reply
Old Jul 21, 2006 | 11:01 AM
  #15  
al503's Avatar
al503
Registered User
iTrader: (4)
 
Joined: Apr 2003
Posts: 258
Likes: 0
From: Portland Oregon
Default

you might also check the tire pressures and see if the right side isn't overinflated compared to the left tires.
Reply
Old Jul 31, 2006 | 11:45 PM
  #16  
BRONZEE's Avatar
BRONZEE
Club Moderator
 
Joined: May 2006
Posts: 6,973
Likes: 7
From: New Zealand
Default

Originally Posted by 350drft
Basically, the cars steers to to right, so I need to overcorrect the steering wheel to the left to go straight. Below is what the dealership has tried already, PLEASE, any other ideas?!

1) Allignment (2 different shops)
2) Different wheels
3) Different tires
4) Replace front right strut/housing
5) Replace front right suspension copmpression rod.
6) Replace steering knuckle
7) Adjusted steering rack
8) Removed sway bars
9) Took measurements to see if anything in the suspension was bent.
10) Reset steering angle sensor.
350drft, I've only just found this thread. I have major issues with my 350 at the moment, just curious as to what the problem was with your 350???
Reply




All times are GMT -8. The time now is 12:02 AM.