Notices
Maintenance & Repair 350Z up keep and diagnosing/fixing problems

No start issue??

Thread Tools
 
Search this Thread
 
Old Oct 7, 2007 | 07:53 AM
  #1  
SilverZ 03's Avatar
SilverZ 03
Thread Starter
Registered User
 
Joined: Sep 2007
Posts: 1
Likes: 0
From: Pa
Question No start issue??

Weird thing just started with my Z. I put the key in the ignition and turn it to start, nothing happens. The dash lights come on, radio work, headlights work, wipers, etc... does NOT make a clicking noise or any other noise..just nothing. If I keep trying it a few times, eventually it starts. Seems like a sensor to me. Any suggestions???
Reply
Old Oct 9, 2007 | 03:12 PM
  #2  
omega6's Avatar
omega6
Registered User
iTrader: (1)
 
Joined: Dec 2003
Posts: 407
Likes: 0
From: Bay Area / Penn.
Default

what year is your car and miles?

1. clean your battery (connectors)

2. '03-'04 Z's have a tendency of not starting due misreading of the small chip in your key. Only occurs for me when, the "stock" alarm light stays on when I insert the key. (i wrote a long page about this before... "search")

simple fix: just re-alarm and un-alarm your car if u have a stock keyless remote entry or if that red light does stay ON, resert key till it turns off.

you can search this problem in the forums, goodluck.
Reply
Old Oct 9, 2007 | 06:40 PM
  #3  
cheshirecat79's Avatar
cheshirecat79
New Member
iTrader: (9)
 
Joined: Apr 2007
Posts: 15,936
Likes: 4
From: Port St. Lucie, FL
Default

Is it a manual transmission? Sounds like the little switch underneath the clutch pedal is going bad.
Reply
Old Oct 10, 2007 | 11:29 AM
  #4  
Ztalker's Avatar
Ztalker
Registered User
 
Joined: Sep 2005
Posts: 7,951
Likes: 0
From: USA
Default

Originally Posted by cheshirecat79
Is it a manual transmission? Sounds like the little switch underneath the clutch pedal is going bad.

^^Yup, most likely^^sticky switch.

happened to me a couple of times earlier this years. i sprayed a few drops of W-40 at that pressure switch under the clutch pedal near the fire wall. BINGO...problem fixed.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MM'08_350Z
VQ35HR
225
Apr 22, 2021 09:42 PM
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM
sherm
Engine & Drivetrain
15
Apr 11, 2020 05:21 PM
350z82
Exterior & Interior
19
Oct 1, 2015 06:25 PM




All times are GMT -8. The time now is 03:29 PM.