350Z = Diesel Engine? And Tranny Question
I turned on my Z Christmas morning and when it started it sounded just like a diesel engine! My first thought was low oil, so I turned it off checked the oil a few times, waited, checked some more, and it was just fine. I get back in a lil later and when I try turning it on it was sounding like it was almost dead and barely wanted to turn on, but it did and I let it warm up. Turned it off and on one more time and it has been running great ever since. Should I be worried about it?
And also I have a 5AT and Ive noticed the Z has been starting to redline now when I push it every so often, wtf is up with that? It has never done this to me before.
And also I have a 5AT and Ive noticed the Z has been starting to redline now when I push it every so often, wtf is up with that? It has never done this to me before.
Your transmission is slipping pretty bad.
As for the rough start: spark plugs? Could have a misfire somewhere. But I'm surprised you don't have a light on. Is your gas tank full? How old is your gas? When was the last time you started the car?
As for the rough start: spark plugs? Could have a misfire somewhere. But I'm surprised you don't have a light on. Is your gas tank full? How old is your gas? When was the last time you started the car?
Originally Posted by Arnold K.
Your transmission is slipping pretty bad.
As for the rough start: spark plugs? Could have a misfire somewhere. But I'm surprised you don't have a light on. Is your gas tank full? How old is your gas? When was the last time you started the car?
As for the rough start: spark plugs? Could have a misfire somewhere. But I'm surprised you don't have a light on. Is your gas tank full? How old is your gas? When was the last time you started the car?
And I was just as surprised as there being no light on either. I was expecting it to pop on at anytime, but nothing yet.
Trending Topics
I'd suspect a crank or cam position sensor, maybe wet or something. No CEL along with it? Sometimes the ecu will store sensor information of a problem before tripping the CEL, have it scanned for stored codes.
Thread
Thread Starter
Forum
Replies
Last Post
etkms
Engine & Drivetrain
29
Jun 19, 2022 06:30 PM





