Notices
Maintenance & Repair 350Z up keep and diagnosing/fixing problems

different problem with window...

Old Oct 23, 2008 | 09:10 PM
  #1  
JonnyRod's Avatar
JonnyRod
Thread Starter
Registered User
iTrader: (20)
 
Joined: Aug 2006
Posts: 567
Likes: 0
From: Paradise Valley, AZ
Default different problem with window...

Im having a unique problem with both of my windows. The windows goes up and down fine, with and without the auto function, and with or without the door closed. But once the key is turned off, as soon as i open my door to get out of the car, the window rolls ALL the way back down. I tried the reset procedure plenty of times but its not working. It went bad the same exact time my passenger window motor took a crap too. Any ideas???

Last edited by JonnyRod; Oct 24, 2008 at 05:48 PM.
Reply
Old Oct 23, 2008 | 10:08 PM
  #2  
JonnyRod's Avatar
JonnyRod
Thread Starter
Registered User
iTrader: (20)
 
Joined: Aug 2006
Posts: 567
Likes: 0
From: Paradise Valley, AZ
Default

i hope someone has an answer... i cant make it to the dealership anytime soon!
Reply
Old Oct 24, 2008 | 06:30 AM
  #3  
JonnyRod's Avatar
JonnyRod
Thread Starter
Registered User
iTrader: (20)
 
Joined: Aug 2006
Posts: 567
Likes: 0
From: Paradise Valley, AZ
Default

bump
Reply
Old Oct 24, 2008 | 02:23 PM
  #4  
JonnyRod's Avatar
JonnyRod
Thread Starter
Registered User
iTrader: (20)
 
Joined: Aug 2006
Posts: 567
Likes: 0
From: Paradise Valley, AZ
Default

someone mentioned resetting the keyfob...ring a bell for anyone?
Reply
Old Oct 24, 2008 | 08:38 PM
  #5  
JonnyRod's Avatar
JonnyRod
Thread Starter
Registered User
iTrader: (20)
 
Joined: Aug 2006
Posts: 567
Likes: 0
From: Paradise Valley, AZ
Default

ill pay somebody to figure out this problem for me! lol
Reply
Old Oct 24, 2008 | 08:42 PM
  #6  
Jarred@Z1's Avatar
Jarred@Z1
Sponsor
Z1 Motorsports
iTrader: (4)
 
Joined: Apr 2007
Posts: 1,194
Likes: 0
From: Peachtree City
Default

it sounds like the motor reset procedure have you pulled off your door pannel and done it?
Reply
Old Oct 25, 2008 | 02:30 AM
  #7  
JonnyRod's Avatar
JonnyRod
Thread Starter
Registered User
iTrader: (20)
 
Joined: Aug 2006
Posts: 567
Likes: 0
From: Paradise Valley, AZ
Default

Originally Posted by Jarred@Z1
it sounds like the motor reset procedure have you pulled off your door pannel and done it?
ya as i mentioned in my initial post, ive tried the reset procedure many times...nothing. i think its because its a different problem. it only happens when my key is OFF and when i open the door, BOTH windows will roll ALL the way down at the same exact time...as if im holding the unlock button on my keyfob
Reply
Old Oct 25, 2008 | 09:59 AM
  #8  
JonnyRod's Avatar
JonnyRod
Thread Starter
Registered User
iTrader: (20)
 
Joined: Aug 2006
Posts: 567
Likes: 0
From: Paradise Valley, AZ
Default

i left my battery unhooked for all of last night (about 12 hours) and it didnt change anything. im completey stumped
Reply
Old Oct 25, 2008 | 11:50 AM
  #9  
JonnyRod's Avatar
JonnyRod
Thread Starter
Registered User
iTrader: (20)
 
Joined: Aug 2006
Posts: 567
Likes: 0
From: Paradise Valley, AZ
Default

just checked all fuses in all three panels...everything is good
Reply
Old Oct 26, 2008 | 09:41 AM
  #10  
JonnyRod's Avatar
JonnyRod
Thread Starter
Registered User
iTrader: (20)
 
Joined: Aug 2006
Posts: 567
Likes: 0
From: Paradise Valley, AZ
Default

sunday bump
Reply
Old Nov 15, 2008 | 12:56 PM
  #11  
Dennis Passmore's Avatar
Dennis Passmore
Registered User
 
Joined: Jun 2006
Posts: 9
Likes: 0
From: Edgewater FL
Default

Have you checked the drivers side door lock on the outside. Someone may have stuck something in there while trying to open the car. If you insert your key and try to unlock the car and if you leave there it for more than two seconds then both windows will automatically go down.
Reply
Old Dec 14, 2008 | 07:57 AM
  #12  
st8king's Avatar
st8king
Registered User
iTrader: (1)
 
Joined: Oct 2008
Posts: 41
Likes: 0
From: Cape Coral, FL
Default

This just started happening to me too yesterday was hoping to find a cheap solution before I took it to the dealership tomorrow. I will let you know what I find out.
Reply
Old Dec 15, 2008 | 06:05 PM
  #13  
st8king's Avatar
st8king
Registered User
iTrader: (1)
 
Joined: Oct 2008
Posts: 41
Likes: 0
From: Cape Coral, FL
Default

O.K. problem fixed. The dealership found that the connection on the window micro switch inside the door panel had come loose and had corrosion in it. They cleaned it up and reconnected and as is well.

Rich
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Uriyo_
Exterior & Interior
22
Sep 8, 2021 08:46 AM
Lt_Ballzacki
Brakes & Suspension
39
Aug 6, 2021 06:19 AM
TDPrank
Brakes & Suspension
5
Sep 28, 2015 06:29 AM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 02:49 PM.