Before I end up going to the Wlmg , I recently had the 'mi' 'ESP ' 'slip' warning lights on , with the sudden lose of power took it to a Mac mate who plugged the diagnostics n come up with the fault code regarding the cam pos sensors , have renewed the B1 and B2 sensors and cleared the fault codes , only to restart and the same problem coming up and then C1130 engine 1 fuel cut , now i think the C part means its a Nissan faut code where as the PO codes are general faut codes , can anyone shed some light Cheers

 

See post #9 here....

http://g35driver.com/forums/g-spot/2...ights-all.html

 

after reading all the post and replacing both cam sensors, crankshaft position sensor, throttle body, all o2 sensors and still had the same issue of fuel cut out along with abs,vdc,slip and service engine soon lights on I decided to check all my grounds and clean them upon doing so I replaced both positive and negative battery cables and then all my problems were resolved I probably didn't need all the sensors just the battery cables hope this helps