nick731

currently my pregnant wife = (im the one getting hit by the way lol)

2004 350z 130k roadster

ac clutch will not engage
it will blow air full blast out of vents
the dual front blower fans behind the grill will not engage

i read somewhere that if the front fans wont engage then the a/c wont either....

i know power is getting to the fuse when i engage the a/c button
i also know there is freon in the system

please help!!

thanks!!

PerfZ

iTrader: (3)

Replace the fans. Fairly easy DIY - much easier than getting beat on by a pregnant wife, lol.

Atl_Adam

iTrader: (1)

Nick - I have the exact same problem. Please keep me updated as to how you fixed yours.

nick731

cooling fans working great, still no A/C though! =(

nick731

the clutch nor the fans engage when i hit the A/C button...

laurentj23

iTrader: (1)

I think they have some kind of recall abt the clutch fan?
how many miles is it? check the recall and see whether you qualify. If not replace it. Shldn't be that hard.

Italianjoe1

iTrader: (6)

Probably a pressure switch issue. If the system thinks there isn't any freon it won't allow the compressor to come on.

122554

iTrader: (9)

Call dealer, give VIN, see if fan has been replaced under recall.

Patrick250

Found this nifty secret handshake for the IPDM to go into diagnostics mode. I've never tried it. Looks like it exercises both the radiator fans and the A/C clutch.

Edit: Tried it on my '07. Kind of cool. Make sure you put your hood down and your wipers up.

JasonZ-YA

iTrader: (60)

get something to tap the clutch and engage the clutch while the AC button is ON, im wondering if there is a gap check thats too big on your clutch due to how old/mileage your car has?

check the service manual for a gap check on the clutch?

Bingo:


if when you tap the clutch, it engages and pops out later or after driving, etc...then the gap has grown to big...retorque, re-gap..check with feeler gauge and ensure (.010-.024 inch).


-J

JasonZ-YA

iTrader: (60)

check atc.pdf in the service manual, search magnet clutch - there is a trouble shoot guide, that leads down to replacing the unimeter which is the all white box that connects under the AC controls in the center console...

good luck,

-J