Master Cylinder empty
#1
New Member
Thread Starter
Join Date: Oct 2012
Location: PA
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Master Cylinder empty
So yesterday I thought my clutch pedal felt different, like that little spot at the top was somewhat less pronounced. Then today the pedal isn't fully returning on my way to work, I had to pull it back up sometimes and it would pop back into place. When I got to work I looked at the MC and it's dry. Bad MC? How much should this cost to get replaced?
2007 Enthusiast MT
2007 Enthusiast MT
#4
New Member
Thread Starter
Join Date: Oct 2012
Location: PA
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
How much should I be expecting if it's a slave cylinder replacement?
Also I called and checked and the slave cylinder recall was already performed back in 08. So I guess I'm out of luck as far as that goes eh?
Also I called and checked and the slave cylinder recall was already performed back in 08. So I guess I'm out of luck as far as that goes eh?
Last edited by Destroyeron; 12-17-2012 at 08:41 AM.
#5
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
Look for the leak. Fluid is either coming out of the bell housing or out of the back of the master cylinder onto the floorboards
#6
New Member
Thread Starter
Join Date: Oct 2012
Location: PA
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Took it to the dealer and they couldn't find a leak. They refilled it and its back to its old self now, so I'm just gonna watch the fluid level and see what time does.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
SpartanZ32
Zs & Gs For Sale
4
10-22-2015 09:36 AM
hardkicks
Zs & Gs For Sale
0
09-20-2015 12:28 PM