Hey guys, 2003 gt

I got into a bad accident but completely repaired my z

After installing my new drivers door I could not relearn the window motor.

As of right now:
No auto up/down
Shut door, window drops n repeats as i shut it over and over

I know the relearn procedure BUT, this doors window motor does not have a reset button!! Also why no auto up?
Ive reset my old motors a few times so i know the procedure..

Can someone help me out!???

 

I recently installed a drivers side window door motor with the same problem. I have installed other window motors and was able to reset them. Anyway I have the same problem. It continues to lower about two inches every time I open and close the door til is is all the way down. The window goes up and down fine but just continues to lower itself.

I took a look at the motor the other day and it seems the reset button assembly has separated from the motor and is sorta flopping in the breeze. I think the only cure is a new window motor.

I have a feeling your reset switch is behind the door panel hanging to low to see it through the small reset window of the door panel.

 

So u think, If i just replace the motor with my other one it will work?

I can do that i just thought there was another way of doing this

Also, will it fix my auto up/down feature?

Ive replaced the motors a few times and never have seen this style of motor
Thanks
Travis

 

Its weird cuz when i look thru the pilot window there is no spot for the reset button .. Its just a metal casing for the motor..
i need someones input
I can swap motors i guess i just didnt want to if theres nother way to fix it. Also im concerned about my auto up/down feature.

 

Nobody has input? I thought this was a pretty common issue we have...

 

Stripped my old door panel, removed regulator woth motor attached, glass, and handle with my key cylinder.
Waiting on a nice day to install it. Shes cold as cold can be in canada!