Spark plug tube seal transplant!
#23
Registered User
Join Date: Oct 2011
Location: Ontario , Canada
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Video Link
Any body have the video link that Go7roo7 followed . Please pass it on interested in doing the swap .
Which is better the Altima seals or the Pathfinder seal for best fit ?
In my industry we use many different adhesives and sealants . Using RTV type Silicone is not the best product for this issue . Permatex makes two products that are better suited for this type of heat and oil soaking Ultra Black Permatex 82180 and Right Stuff® Instant Rubber Gasket Maker Permatex 25224 . Clean area and seals with a good Brake cleaner . Apply even 1/8" bead , install and wait at least 4 hours (overnight is best) then install . I would also seal the mating surface to the tubes . Just smear it on the surface sparingly and let cure before starting .
Gixxer
Which is better the Altima seals or the Pathfinder seal for best fit ?
In my industry we use many different adhesives and sealants . Using RTV type Silicone is not the best product for this issue . Permatex makes two products that are better suited for this type of heat and oil soaking Ultra Black Permatex 82180 and Right Stuff® Instant Rubber Gasket Maker Permatex 25224 . Clean area and seals with a good Brake cleaner . Apply even 1/8" bead , install and wait at least 4 hours (overnight is best) then install . I would also seal the mating surface to the tubes . Just smear it on the surface sparingly and let cure before starting .
Gixxer
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM
Gruppe-S
Body Interior
13
05-16-2016 10:42 PM