Notices
Maintenance & Repair 350Z up keep and diagnosing/fixing problems

Part#'s for Fuel Level Sensors

Thread Tools
 
Search this Thread
 
Old May 14, 2014 | 08:54 AM
  #1  
IridiumCore's Avatar
IridiumCore
Thread Starter
Registered User
 
Joined: Mar 2014
Posts: 30
Likes: 0
From: Bensalem, PA
Default Part#'s for Fuel Level Sensors

Would anyone happen to have part numbers for the fuel level sensors or an O5 Touring.

I'm going through that whole inaccurate needle thing. I can squeeze around 240-270 out of a tank but I get a little nervous so I'm thinking about cleaning the contacts; I just want a firm backup plan.
Reply
Old May 14, 2014 | 08:56 AM
  #2  
travlee's Avatar
travlee
Master
Premier Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (8)
 
Joined: Jul 2011
Posts: 49,725
Likes: 9,296
From: Texas
Default

Originally Posted by IridiumCore
Would anyone happen to have part numbers for the fuel level sensors or an O5 Touring.

I'm going through that whole inaccurate needle thing. I can squeeze around 240-270 out of a tank but I get a little nervous so I'm thinking about cleaning the contacts; I just want a firm backup plan.
i dont have time to look for it right now, but go here courtesyparts.com
Reply
Old May 15, 2014 | 09:12 PM
  #3  
patrickoneal's Avatar
patrickoneal
Registered User
 
Joined: Apr 2012
Posts: 153
Likes: 19
From: Portsmouth, VA
Default

http://www.nissanpartszone.com/Page_...mponentsNo=172

Look at the bottom of the list. It looks like the part numbers have been replaced by newer numbers. I linked to nissanpartszone because courtesy obfuscates their part numbers so you can't use them to shop around. You can however type a real part number into courtesy's site and it will find it.
Reply
Old May 16, 2014 | 07:58 AM
  #4  
Calinismo350z's Avatar
Calinismo350z
Registered User
iTrader: (3)
 
Joined: Apr 2012
Posts: 382
Likes: 0
From: coachella, california
Default

just went trough the same nightmare a couple of weeks ago... I would recommend to clean the level sender unit, it worked for me; it took me less than an hour to clean both sides. Good luck.
Reply
Old May 16, 2014 | 06:00 PM
  #5  
bealljk's Avatar
bealljk
350Z-holic
15 Year Member
Liked
Loved
Community Favorite
iTrader: (13)
 
Joined: Apr 2010
Posts: 6,504
Likes: 1,325
From: North Denver
Default

IC - I've got an extra fuel pump assembly - although it has a top side broken fuel hose connection. I'm not using as I replaced it after I broke the plastic hose connection a few months back. If you're interested let me know and I can upload pics.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MM'08_350Z
VQ35HR
225
Apr 22, 2021 09:42 PM
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM




All times are GMT -8. The time now is 05:48 PM.