Need proper P/N fir HID igniter
#1
New Member
Thread Starter
Need proper P/N fir HID igniter
Good evening all. I need some help getting a part number for the HID headlight igniter on the g/f's 2004 350z. Below is a picture of the part that came off of the car.
Looking at AutoZone and O,Reilly, they say P/N 601-166, pictured below, is the correct part for the car. Alas, the strain relief / ground tab is not in the right spot, and there is no spade connector on the light head for the small ground strap from the housing.
Does anyone have a part number that will get me the part at the top?
Thanks,
Jeff
Looking at AutoZone and O,Reilly, they say P/N 601-166, pictured below, is the correct part for the car. Alas, the strain relief / ground tab is not in the right spot, and there is no spade connector on the light head for the small ground strap from the housing.
Does anyone have a part number that will get me the part at the top?
Thanks,
Jeff
Last edited by TangoAlphaZulu; 10-29-2018 at 07:08 PM.
The following users liked this post:
MicVelo (10-30-2018)
#4
New Member
I'm not sure if the grounds will be any different or not, but most/all nissans from the 2000's with standard HID's, even common ones like altimas and maximas used the same ballast and I think igniter. If you have access to a salvage yard it might be worth checking out.
The following users liked this post:
MicVelo (10-30-2018)
Thread
Thread Starter
Forum
Replies
Last Post
XERMAN2001
Exterior & Interior
14
04-22-2010 07:00 PM
RANDY350Z
Exterior & Interior
3
06-24-2007 08:27 PM