Engine Bay Dress Up Gallery
02-27-2013 | 05:59 PM
#702
^looks sexy! 
looking to start working on my timing cover tomorrow
did my plenum by hand abt 3 weeks ago
(still some spots i need to finish but arent really noticeable)
any ideas or advice is welcomed thankss
for now just trying to stick with simple stuff that i could do myself
not really looking to put to much money towards this right now while i save up for new wheels
looking to start working on my timing cover tomorrow
did my plenum by hand abt 3 weeks ago
(still some spots i need to finish but arent really noticeable)
any ideas or advice is welcomed thankss
for now just trying to stick with simple stuff that i could do myself
not really looking to put to much money towards this right now while i save up for new wheels
Last edited by RedLine_ZR; 02-27-2013 at 06:06 PM.
02-27-2013 | 07:28 PM
#704
02-28-2013 | 04:47 AM
#706
I'm going for round 2!
This is the previouse bay below. I will be shaving everything behind the strut all the way to a strait drop windshield. There will be no bolts anyware. Follow my V4.0 build on instagram @muzzyyousefi #RHD #350z #bensopra #covercar.
engine out and ready to cut
This is the previouse bay below. I will be shaving everything behind the strut all the way to a strait drop windshield. There will be no bolts anyware. Follow my V4.0 build on instagram @muzzyyousefi #RHD #350z #bensopra #covercar.
engine out and ready to cut
03-02-2013 | 03:35 PM
#708
polishing the timing cover still a work in progress...
hopefully done tomorrow.. ill get a better pic in the day time
ik its not the best and probably has its share of "spots" now
but ill be trying to correct them
**also order my polished rare jdm cover
hopefully done tomorrow.. ill get a better pic in the day time
ik its not the best and probably has its share of "spots" now
but ill be trying to correct them
**also order my polished rare jdm cover
Last edited by RedLine_ZR; 03-03-2013 at 07:54 PM.
03-03-2013 | 07:58 PM
#710
Man
I'm.really interested in how u did that..I neglected to polish mine and its all back and installed.
Mind pming me etc and letting me know what tools steps and brands u used?
I'm.really interested in how u did that..I neglected to polish mine and its all back and installed.
Mind pming me etc and letting me know what tools steps and brands u used?
03-04-2013 | 11:10 AM
#713
The SxExCx square, polished tanks are my next mod! I need to get a bunch of little stuff wrapped up that I'm currently working on, and then I need to get a set ordered Can't wait!
03-04-2013 | 03:46 PM
#714
That one's got the coolant inlet on the top.. Should it not be on the bottom for our application?
I just picked that one up from a local shop today and realized after that the inlet is on the top.
I've got the Weapon-R 350Z specific one here too and its inlet is on the bottom.
Edit:
I think for the round universal one this is the one we need:
http://www.weapon-r.com/products/106...-tank-24-fl-oz
Inlet port is on the bottom.
I just picked that one up from a local shop today and realized after that the inlet is on the top.
I've got the Weapon-R 350Z specific one here too and its inlet is on the bottom.
Edit:
I think for the round universal one this is the one we need:
http://www.weapon-r.com/products/106...-tank-24-fl-oz
Inlet port is on the bottom.
There is a weapon r coolant overflow tank and a coolant catch tank that's the one with the inlet on top make sure you get the right one
03-04-2013 | 03:52 PM
#715
This is the one I have now I drilled a hole next to the OEM one so it sits straight but it is a tight fit and takes a lot of space looking to get the round universal one and a power steering one as well to free up some space and take out the washer fluid one all together and put the cusco catch can in that spot
03-06-2013 | 04:55 AM
#717
here's a different brand of power steering tank
the brand is called Billion, like a billion dollars,
this one also fits the OEM bracket.
this one also fits the OEM bracket.
Last edited by Dan Garcia; 03-06-2013 at 04:57 AM.
03-09-2013 | 06:09 AM
#720
ha I paid about $320 for it. It is about a month old but I powdercoated it flatblack to match the rest of my engine bay. I will probably ask $160 shipped for it once I uninstall it in a two- three weeks.