Engine Bay Dress Up Gallery
#841
hatersgonnahate
iTrader: (162)
on a LHD 350z 03-06 it is on the drivers side. Youll be able to trace the rubber hose and hard pipe to it. Youll have to remove the cowl pieces. Getting the hard pipe out is doable but a pain.
#843
hatersgonnahate
iTrader: (162)
its not that bad to remove. Jsut have to twist and move around...takes like 5 minutes.
You could leave it but that would defeat the purpose of an engine tuck.
you can see the hole where i rerouted the brake booster line just below the cowl mounting tab on the drivers side. I had the old hole where the hard line came through patched up and painted.
You could leave it but that would defeat the purpose of an engine tuck.
you can see the hole where i rerouted the brake booster line just below the cowl mounting tab on the drivers side. I had the old hole where the hard line came through patched up and painted.
#846
hatersgonnahate
iTrader: (162)
You can see the exposed nipple in this pic (thanks to sgfl2010) and you can also see why we wire tuck. Crazy though, i look at these bays and they are amazingly clean but it never hurts to remind yourself what OEM was.
#853
Registered User
iTrader: (5)
Join Date: Feb 2012
Location: Orange, California
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
It looks like he just bought polished parts for the most part.
Polished rare jdm engine cover, polished fluid tanks, polished cusco strut bar, and then he might have sanded down and polished the plenum or just bought a polished one, as well as the timing cover, and throttle body, and CAI.
Polished rare jdm engine cover, polished fluid tanks, polished cusco strut bar, and then he might have sanded down and polished the plenum or just bought a polished one, as well as the timing cover, and throttle body, and CAI.
#856
Registered User
iTrader: (2)
carbon fiber engine help
I have a 2003 track model. replaced stock hood with 2006+ VIS CF hood.
have this exact hood..http://www.vividracing.com/forums/ga...3/f-350z02.jpg
Cant latch hood with the battery and BF covers on ... tried with and without the CF covers on these and couldn't get to latch either way...
anyone else have this problem?
have this exact hood..http://www.vividracing.com/forums/ga...3/f-350z02.jpg
Cant latch hood with the battery and BF covers on ... tried with and without the CF covers on these and couldn't get to latch either way...
anyone else have this problem?
#859
Registered User