My new in dash DVD setup. The Bose can be changed!!!
06-12-2006, 12:17 PM
#41
Registered User
iTrader: (5)
Join Date: Mar 2006
Location: Maryville, TN
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bacalhau16
where is everyone buying their radio harness for their cars?
06-13-2006, 04:40 AM
#45
Registered User
iTrader: (11)
Join Date: Aug 2005
Location: Harrisburg, PA
Posts: 2,014
Likes: 0
Received 0 Likes
on
0 Posts
Oh and here are some details of how I mounted the screen. The Power Akoustic from millionbuy.com fits perfectly snug in the cubby, but it mounts differently then the Farenheits off ebay due to the Power Akoustic having a bulkier case.
Basically, I put 2 self tapping screws behind the LCD at the top and I mounted two L-Brackets to the cubby with Epoxy at the bottom. [See diagram below] The screen doesn't budge even when forced.
Also, it should be noted that I drove without any mounting screws and/or L-brackets for about 3 hours (1.5 hours one way and back) and the screen didn't move at all; that's how snug a fit it is in the cubby. However, I put them in there to be safe. I'm guessing after weeks of driving on PA roads with bumps, etc. it may move slightly.
Basically, I put 2 self tapping screws behind the LCD at the top and I mounted two L-Brackets to the cubby with Epoxy at the bottom. [See diagram below] The screen doesn't budge even when forced.
Also, it should be noted that I drove without any mounting screws and/or L-brackets for about 3 hours (1.5 hours one way and back) and the screen didn't move at all; that's how snug a fit it is in the cubby. However, I put them in there to be safe. I'm guessing after weeks of driving on PA roads with bumps, etc. it may move slightly.
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM
