Ultra Yellow Enthusiast on Volk GTS in RMC finish
#1
Registered User
Thread Starter
iTrader: (4)
Join Date: May 2006
Location: PA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Ultra Yellow Enthusiast on Volk GTS in RMC finish
Just thought I'd share some overdue pictures of my Ultra Yellow Enthusiast. Car is sitting to Tokico D-specs and Tanabe GF-210 springs (wish they were even lower) with Volk GTS 9.5/10.5 +30/+28 RMC finish wrapped in Toyo T1-R 255/285 tires. Overall the stance is pretty aggressive, but I might get some 5mm spacers for the fronts. As of now, I couldn't have been happier to get rid of those hideous stock 17s Enough of the chatter, here's what everyone came here for:
For those that want some more techinical specs, here are the weight differences:
OEM Fronts = 49.8 lbs
GTS Fronts = 52.1 lbs
OEM Rears = 50.0 lbs
GTS Rears = 58.5 lbs
Considering I went with the 255/285 combo and my OEM tires were more than 60% worn, I think these weights are still relatively light. I haven't noticed any "soft" sidewalls as I am running these Toyos at 37.5 PSI at all four corners.
Comments are welcome!
For those that want some more techinical specs, here are the weight differences:
OEM Fronts = 49.8 lbs
GTS Fronts = 52.1 lbs
OEM Rears = 50.0 lbs
GTS Rears = 58.5 lbs
Considering I went with the 255/285 combo and my OEM tires were more than 60% worn, I think these weights are still relatively light. I haven't noticed any "soft" sidewalls as I am running these Toyos at 37.5 PSI at all four corners.
Comments are welcome!
Trending Topics
#10
Registered User
Thread Starter
iTrader: (4)
Join Date: May 2006
Location: PA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the comments everyone. With roads over here, I had to go with the conservative set-up. Fenders are not rolled and so far no rubbing. I haven't had a chance to drive it real hard yet, so I'll keep everyone updated on that.
#17
Registered User
iTrader: (4)
Join Date: Apr 2006
Location: Hillside, NJ
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PalmXP3
Thanks for the comments everyone. With roads over here, I had to go with the conservative set-up. Fenders are not rolled and so far no rubbing. I haven't had a chance to drive it real hard yet, so I'll keep everyone updated on that.
Honk if you see me!
Last edited by JasiJ; 11-01-2007 at 08:05 PM.
#18
Registered User
Thread Starter
iTrader: (4)
Join Date: May 2006
Location: PA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Tire specs are 255/35/19 Front and 285/35/19 Rears. Looking at them now, even though they don't rub, I think I would have prefered to do the 255/275 combo since the sidewall height looks a little too "chunky" to me. But the extra grip and more rim protection is nice too. As for BBK, I would do the calipers in Red or Black, Yellow would be too much IMO.
Jasi, I'm like 10 mins north of the Philly area. Never seen you around, but would definitely honk if I saw ya. Nice car btw, and excellent choice in color
Jasi, I'm like 10 mins north of the Philly area. Never seen you around, but would definitely honk if I saw ya. Nice car btw, and excellent choice in color
#20
New Member
iTrader: (1)
Join Date: Sep 2005
Location: miles away
Posts: 1,890
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PalmXP3
Thanks for the comments everyone. With roads over here, I had to go with the conservative set-up. Fenders are not rolled and so far no rubbing. I haven't had a chance to drive it real hard yet, so I'll keep everyone updated on that.