photoshoot for magazine
Originally Posted by widebody350
Ok...these are pics from last week. The wheels are 19x11 fronts and 19x12.5 rears with custom offsets and are Work Meisters. The interior is will be fully custom and will be started next week. The Z bar and the plastic behind the seats will all be cut out, the whole interior will be wrapped in suede, EVO-R CF interior kit, custom roll cage, etc. The whole car will be done by mid-late March. I will post pics with everything on the car when I get the pics from my shop. Mercedes Terrell can be found at mercedesterrell.com. I've already got her on board to do it and just have to await the approval from Super Street editor John Naderi.
ok cool post pics when your done! my wheels are work equips 19x10 19x12
For the record I wasn't talking about the man's car just the model. Nice Z...Did you do anything more for this season? I'll definately have some pics of mine up as soon as it's done.
first off...you know what happens when you assume...so dont do it.
I know full well what some of you are talking about...I dont really feel like explaining this but I will...
redlude97 in a different thread thought that I had somehow fiberglassed the whole inner fender, see here:note the first picture....
I told him that was just paper...people went so far as to edit the photo...note second picture...in the 2nd picture...where he points out that it is fiberglass...it is not...and now people like redlude and jinsei are saying they weren't talking about the inner fender...they are talking about the under side of the fender flare...and I'm saying that I have 20mm spacers on my rear wheels that push my wheel out that far....notice how my wheels stick out further than the veilside version 3 and ron's buddy club 2 car???? guess what happens if I ordered 15mm adapters instead of 20mm?? oh my god!! my wheels would sit INSIDE the fender...note the 3rd picture...
I will take my wheel off and take a picture...just for the non believers, you can pm me your email address if you really care enough to see it.
but i dont feel like arguing about this anymore...so would a mod please lock this thread?
I know full well what some of you are talking about...I dont really feel like explaining this but I will...
redlude97 in a different thread thought that I had somehow fiberglassed the whole inner fender, see here:note the first picture....
I told him that was just paper...people went so far as to edit the photo...note second picture...in the 2nd picture...where he points out that it is fiberglass...it is not...and now people like redlude and jinsei are saying they weren't talking about the inner fender...they are talking about the under side of the fender flare...and I'm saying that I have 20mm spacers on my rear wheels that push my wheel out that far....notice how my wheels stick out further than the veilside version 3 and ron's buddy club 2 car???? guess what happens if I ordered 15mm adapters instead of 20mm?? oh my god!! my wheels would sit INSIDE the fender...note the 3rd picture...
I will take my wheel off and take a picture...just for the non believers, you can pm me your email address if you really care enough to see it.
but i dont feel like arguing about this anymore...so would a mod please lock this thread?
Originally Posted by redlude97
hmm so what did you paint in this pic then if it isn't fiberglass?
but dont even try and get out of the fact that you accused me the WHOLE inner fender being fiberglass in the other thread..which you now see is not the case...
Originally Posted by lemans350zed
there is a lip there...if not it would be flimsy as hell and it's not more than maybe half an inch at most..
but dont even try and get out of the fact that you accused me the WHOLE inner fender being fiberglass in the other thread..which you now see is not the case...
but dont even try and get out of the fact that you accused me the WHOLE inner fender being fiberglass in the other thread..which you now see is not the case...
you also said it was no more than 1.5" earlier in this thread and now its no more than 1/2" Just post a pic of the fenderwell area without the wheel, and if its done correctly, I'll eat my words and APOLOGIZE for ever doubting you. Until then I will think its done wrong, you also stated in your other thread the the stock quarterpanel was also not cut, which no matter how small the lip is on the widebody, you will never have suspension clearance because the middle of the tire will hit the stock quarterpanel upon compression
Registered User
iTrader: (8)
Joined: Jan 2004
Posts: 726
Likes: 0
From: Northridge, Earthquake Central
lol....man oh man...now i'm starting to feel sorry for the OP...
lude - just let it go.... who cares if he's in the wrong. In the end, it's his car. You pointed out his mistake and that's it... no need to harass him about it over and over again.
have a good day folks
lude - just let it go.... who cares if he's in the wrong. In the end, it's his car. You pointed out his mistake and that's it... no need to harass him about it over and over again.
have a good day folks
Originally Posted by redlude97
hmm so what did you paint in this pic then if it isn't fiberglass?
Originally Posted by bonusfrag
Nice troll! Gonna go ahead and stick you in ignore list right now as a precaution.
From wikipedia:
In Internet terminology, a troll is a person who enters an established community such as an online discussion forum and intentionally tries to cause disruption, often in the form of posting messages that are inflammatory, insulting, incorrect, inaccurate, absurd, or off-topic, with the intent of provoking a reaction from others.
lol @ people who wear post counts and join dates like badges of honor. yawn
In Internet terminology, a troll is a person who enters an established community such as an online discussion forum and intentionally tries to cause disruption, often in the form of posting messages that are inflammatory, insulting, incorrect, inaccurate, absurd, or off-topic, with the intent of provoking a reaction from others.
lol @ people who wear post counts and join dates like badges of honor. yawn
Originally Posted by bonusfrag
From wikipedia:
In Internet terminology, a troll is a person who enters an established community such as an online discussion forum and intentionally tries to cause disruption, often in the form of posting messages that are inflammatory, insulting, incorrect, inaccurate, absurd, or off-topic, with the intent of provoking a reaction from others.
lol @ people who wear post counts and join dates like badges of honor. yawn
In Internet terminology, a troll is a person who enters an established community such as an online discussion forum and intentionally tries to cause disruption, often in the form of posting messages that are inflammatory, insulting, incorrect, inaccurate, absurd, or off-topic, with the intent of provoking a reaction from others.
lol @ people who wear post counts and join dates like badges of honor. yawn
Originally Posted by redlude97
Where did I flame, insult, make an incorrect statement that was absurd or not on the topic? Of course stating someone is wrong is going to provoke a reaction, but if they are wrong, how is that being a troll?
He's clueless and keeps blaming it on his wheels and suspension
Get over yourself man. It's his car. You made your point that you are the supreme body master of the universe....
I have my opinion on who is right about the bodywork but I am not going to pick on either side. BUT. I would really like to see a pic of the entire wheel well without the wheel so that we can see what is really under there. I can appreciate the time and work that went into the paint but it is not my style car. Nice for show though.