WORK EQUIPS (First Gen) - FINALLY!!!
#121
Thread Starter
New Member
iTrader: (14)
Joined: Nov 2004
Posts: 4,262
Likes: 2
From: South San Francisco, CA
thanks for the compliments guys/gals!
lol, yah we need to get some moving shoots soon!
Originally Posted by evolusion
what crappy pictures! luckily the rims are ballin out of control so they look half way decent... hit me up when you want to shoot...
#123
So I see your front are 9.5 and your rears are 11... but do you have any spacers and what are the offsets ?
I had a 15mm spacer in the rear with 10.5 +22 and it stuck out way too far. But my car was not on coilovers so it wasent that low. Im thinking the spacers would work if I slammed the car more with the new coilovers.
Anyways your set-up looks absolutely amazing from the rear
Keep up the good work !
I had a 15mm spacer in the rear with 10.5 +22 and it stuck out way too far. But my car was not on coilovers so it wasent that low. Im thinking the spacers would work if I slammed the car more with the new coilovers.
Anyways your set-up looks absolutely amazing from the rear
Keep up the good work !
#127
Originally Posted by nexstage350
i love those wheels! i almost bought those, but i couldn't get them cuz they won't fit BBK rear. I ask for custom offeset and still would not work. all good, congrats!!
#128
Originally Posted by UrbanTacticZ
Why would they not work with a custom offset? When you order custom fit wheels, its all about the wheel disk to clear bbk's
#129
Thread Starter
New Member
iTrader: (14)
Joined: Nov 2004
Posts: 4,262
Likes: 2
From: South San Francisco, CA
Originally Posted by TimeAttkZ
So I see your front are 9.5 and your rears are 11... but do you have any spacers and what are the offsets ?
I had a 15mm spacer in the rear with 10.5 +22 and it stuck out way too far. But my car was not on coilovers so it wasent that low. Im thinking the spacers would work if I slammed the car more with the new coilovers.
Anyways your set-up looks absolutely amazing from the rear
Keep up the good work !
I had a 15mm spacer in the rear with 10.5 +22 and it stuck out way too far. But my car was not on coilovers so it wasent that low. Im thinking the spacers would work if I slammed the car more with the new coilovers.
Anyways your set-up looks absolutely amazing from the rear
Keep up the good work !
The more you lower, the more camber you get. But to be honest, too much camber may look a bit odd. I fit the wheels with some slight camber, it's the right offsets and right tire size selection and a even smooth fender roll that gets you happy wheel fitment.
Thanks!
#130
Thread Starter
New Member
iTrader: (14)
Joined: Nov 2004
Posts: 4,262
Likes: 2
From: South San Francisco, CA
Originally Posted by ppw350Zunit
they won't clear because of the flat spoke design.
give and take I guess
Thanks for the kind words, all!
#131
Originally Posted by jinsei888
It's been, what, 6 months since I got the wheels and had them sit in my living room? So they're on finally!
Work Equips (1st Generation 1998 models) - Full Machine Polish Face and Barrel (Dunlop Direzza DZ101 - Very MODESTLY stretched!)
F: 19x10.5 +X 245/35R19
R: 19x11.0 +X 275/30R19
Total clearance, no rub, no squeek, no lip hitting, run over potholes with no issues whatever, daily driven from SF so SJ back to SF again 6 days a week! I've proven it works, if I get another set of wheels later, I know for a fact that I will fit 19x11 Fronts and 19x12 Rears without a whim. I have STANCE SUS coilovers and those rears clear the rear true-coilover setup and that slammed ride height (these sizes clear the spring collar that people worry about with the STANCE/Buddyclub Coilover setups)!
P.S. - Stretching tires FTW, say no to fanboys on forums - haha!
Pictures today (sorry for the poor quality, I was using a point-and-shoot camera):
FLAME ON!!!!
EDIT: some random point-n-shoot pics and wheel closeups per request (08/14/07)
Work Equips (1st Generation 1998 models) - Full Machine Polish Face and Barrel (Dunlop Direzza DZ101 - Very MODESTLY stretched!)
F: 19x10.5 +X 245/35R19
R: 19x11.0 +X 275/30R19
Total clearance, no rub, no squeek, no lip hitting, run over potholes with no issues whatever, daily driven from SF so SJ back to SF again 6 days a week! I've proven it works, if I get another set of wheels later, I know for a fact that I will fit 19x11 Fronts and 19x12 Rears without a whim. I have STANCE SUS coilovers and those rears clear the rear true-coilover setup and that slammed ride height (these sizes clear the spring collar that people worry about with the STANCE/Buddyclub Coilover setups)!
P.S. - Stretching tires FTW, say no to fanboys on forums - haha!
Pictures today (sorry for the poor quality, I was using a point-and-shoot camera):
FLAME ON!!!!
EDIT: some random point-n-shoot pics and wheel closeups per request (08/14/07)
NICE! What offsets are they? Did you drive at all with these on? I have a feeling that they might rub??
#132
Thread Starter
New Member
iTrader: (14)
Joined: Nov 2004
Posts: 4,262
Likes: 2
From: South San Francisco, CA
Originally Posted by 350zrn35
NICE! What offsets are they? Did you drive at all with these on? I have a feeling that they might rub??
thanks!
just like the first post, there is no rub; I daily these 5 days a week around 80 miles a day and I drive them throught the city (San Francisco)--the locals know what I'm talking about haha...not the most well maintained roads in the world. I speed over freeway dips and bumps and holes, no issues, no bottoming out no bent lip, not metal on asphalt, smooth and clean un curbed lip. when the suspension compresses, you have to realize that your car naturally cambers in front and rear, as it cambers when compressing the wheels in fact clear the rolled fender. I have about 1-2mm of clearance, but that is all you need, the camber will not change with varying bumps, it will always remain at 1-2mm at 60mph to 100mph, makes no difference.
cars in japan have been doing this for the past 15-20 years; it's really nothing innovative IMO, thanks though!!!
#133
Originally Posted by jinsei888
thanks!
just like the first post, there is no rub; I daily these 5 days a week around 80 miles a day and I drive them throught the city (San Francisco)--the locals know what I'm talking about haha...not the most well maintained roads in the world. I speed over freeway dips and bumps and holes, no issues, no bottoming out no bent lip, not metal on asphalt, smooth and clean un curbed lip. when the suspension compresses, you have to realize that your car naturally cambers in front and rear, as it cambers when compressing the wheels in fact clear the rolled fender. I have about 1-2mm of clearance, but that is all you need, the camber will not change with varying bumps, it will always remain at 1-2mm at 60mph to 100mph, makes no difference.
cars in japan have been doing this for the past 15-20 years; it's really nothing innovative IMO, thanks though!!!
just like the first post, there is no rub; I daily these 5 days a week around 80 miles a day and I drive them throught the city (San Francisco)--the locals know what I'm talking about haha...not the most well maintained roads in the world. I speed over freeway dips and bumps and holes, no issues, no bottoming out no bent lip, not metal on asphalt, smooth and clean un curbed lip. when the suspension compresses, you have to realize that your car naturally cambers in front and rear, as it cambers when compressing the wheels in fact clear the rolled fender. I have about 1-2mm of clearance, but that is all you need, the camber will not change with varying bumps, it will always remain at 1-2mm at 60mph to 100mph, makes no difference.
cars in japan have been doing this for the past 15-20 years; it's really nothing innovative IMO, thanks though!!!
My friend from Vertex called me yesterday and he was like, "So, what about that meeting we were supposed to have?" HAHA
Anyways, how is your toe right now, were you able to get that back into spec without any problems? How much camber are you running right now?
I met up with Mike last night to pickup a fender roller so I hope I can get the car done soooooon! Air is 100% done, no more leaks or anything. The rear camber arms are at the machine shop right now being tweaked so I hope it does the trick!
#134
DOPE!!!!!!
I hate you for having such a nice wheels...
What's your setting on stance?? I have 10F/7R and it looks like I'll need to beef up my setting for those kind of fitment..
I hate you for having such a nice wheels...
What's your setting on stance?? I have 10F/7R and it looks like I'll need to beef up my setting for those kind of fitment..
Last edited by rkd350z; 08-24-2007 at 12:08 PM.
#135
Dude, hope you don't mind, I posted your wheel pics here: https://my350z.com/forum/showthread....=1#post4283811
Perfect for the thread - close up wheel pics.
Perfect for the thread - close up wheel pics.
#136
Thread Starter
New Member
iTrader: (14)
Joined: Nov 2004
Posts: 4,262
Likes: 2
From: South San Francisco, CA
Originally Posted by Clipdin
Dude, hope you don't mind, I posted your wheel pics here: https://my350z.com/forum/showthread....=1#post4283811
Perfect for the thread - close up wheel pics.
Perfect for the thread - close up wheel pics.
#137
Thread Starter
New Member
iTrader: (14)
Joined: Nov 2004
Posts: 4,262
Likes: 2
From: South San Francisco, CA
Originally Posted by UrbanTacticZ
Weren't we supposed to meet up on Sunday? HAHA OOPS!
My friend from Vertex called me yesterday and he was like, "So, what about that meeting we were supposed to have?" HAHA
Anyways, how is your toe right now, were you able to get that back into spec without any problems? How much camber are you running right now?
I met up with Mike last night to pickup a fender roller so I hope I can get the car done soooooon! Air is 100% done, no more leaks or anything. The rear camber arms are at the machine shop right now being tweaked so I hope it does the trick!
My friend from Vertex called me yesterday and he was like, "So, what about that meeting we were supposed to have?" HAHA
Anyways, how is your toe right now, were you able to get that back into spec without any problems? How much camber are you running right now?
I met up with Mike last night to pickup a fender roller so I hope I can get the car done soooooon! Air is 100% done, no more leaks or anything. The rear camber arms are at the machine shop right now being tweaked so I hope it does the trick!
#138
Originally Posted by 350zrn35
NICE! What offsets are they? Did you drive at all with these on? I have a feeling that they might rub??
no he puts it on dolly's and pushes it around his house.
fuc.king idiot.
#140
Originally Posted by rijowysock
no he puts it on dolly's and pushes it around his house.
fuc.king idiot.
fuc.king idiot.
........
car looks great man, i've been looking at these pics for the past week or so, almost every day, day dreaming . . .