When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
has anyone add on/weld resonators to there single exhaust if they havent have them. my setup is jic ypipe and an agency power single. i bought it knowing that it was the "loudest" exhaust out, i had an idea of adding resonator to get more of the VQ sound kinda like the motordyne single gamma exhaust. if i was to add resonator would i be able to buy the motordyne resonator and have them weld on.
has anyone add on/weld resonators to there single exhaust if they havent have them. my setup is jic ypipe and an agency power single. i bought it knowing that it was the "loudest" exhaust out, i had an idea of adding resonator to get more of the VQ sound kinda like the motordyne single gamma exhaust. if i was to add resonator would i be able to buy the motordyne resonator and have them weld on.
Yes, there's a video on youtube of a Megan Drift Spec (practically identical to an Agency Power) with and without a resonator on the midpipe since they don't come with one.
Yes, there's a video on youtube of a Megan Drift Spec (practically identical to an Agency Power) with and without a resonator on the midpipe since they don't come with one.
DOPE!! this is exactly what i was looking for, now i need to seek out which resonator i want to go with. would i be able to use the motordyne resonator module off the xyz or would i be better off with the magnaflow?
on yours does the pipe touch the cross brace right after the y pipe flange? it does on mine so we wedged a spacer under there and now any time my car goes under a load it vibrates the whole car. no noise, you can just feel it in the body
on yours does the pipe touch the cross brace right after the y pipe flange? it does on mine so we wedged a spacer under there and now any time my car goes under a load it vibrates the whole car. no noise, you can just feel it in the body
mine did the same when i had my agency power, i just used spacers on the front 2 bolts.
on yours does the pipe touch the cross brace right after the y pipe flange? it does on mine so we wedged a spacer under there and now any time my car goes under a load it vibrates the whole car. no noise, you can just feel it in the body
Originally Posted by etai43
mine did the same when i had my agency power, i just used spacers on the front 2 bolts.
Mine cleared by far. No where near touching the cross brace.
Some videos of my current setup. Inb4: do the bumper tuck. I've got plans for a rear diffuser and I don't want to screw up any part that may be visible.
Just installed a Greddy RS with 3 inch custom piping but kept the stock resonator. I'll post a video and a few pictures as soon as I can get my buddy's gopro, should be within the next day or so. For all of you out there that are pending on a dual exhaust or single, I admit it does look a bit awkward with just a single exit exhaust (also did a bumper tuck) but the exhaust note that I get from the single exhaust setup makes it more than worth it.
Just installed a Greddy RS with 3 inch custom piping but kept the stock resonator. I'll post a video and a few pictures as soon as I can get my buddy's gopro, should be within the next day or so. For all of you out there that are pending on a dual exhaust or single, I admit it does look a bit awkward with just a single exit exhaust (also did a bumper tuck) but the exhaust note that I get from the single exhaust setup makes it more than worth it.
Same here dude I just did the megan single with bumper tuck and I absolutely love the sound and feel