Padman

iTrader: (1)

So i just recently put my coilovers on. Before, I had a 30mm spacer on the rears because of the not so great offset of my wheels. They are Work Emotion 11R with +30 offsets. Once I lowered it, I was rubbing. What size spacer should i switch to if i do not want to roll my fenders? The chance of cracking my paint when rolling them really makes me not want to go that route.

thanks for the help,

Chris

POWUH

iTrader: (18)

25mm spacers , if you want to run 30mm spacers you will need to roll your fenders and probably a slight pull. if you don't have a camber kit try getting one and running some negative camber with the 30mm spacers and see if you still rub.

Padman

iTrader: (1)

Thanks man, I have a rear camber kit on it, just got it aligned yesterday actaully. Id rather have less camber for the sake of my tires and go with a slightly smaller spacer. So i guess I try out a 25mm spacer and see how that goes.

sdZ33

iTrader: (39)

Measure the distance from the tire to the fender... Then decide how much you want to push the wheel out...

Padman

iTrader: (1)

vv thanks,
Also i need new tires in the rear so i was thinking of going with a bigger setup in the back. what i have on now is just what came with the car stock.

tribal_visionz

iTrader: (16)

Just measure, don't ask me how lol it's going to cost a bit to test fit different spacers, if you go that route.

Padman

iTrader: (1)

Yea just going out to the car and measuring isnt as easy as it sounds.. havent really figured out how im going to do this yet.

NissanZ03

iTrader: (12)

Personally, I think it would look great with slightly bigger wheels to fit the wheel wells better

Padman

iTrader: (1)

Well yea, of course theres always a better option, but for the time being when I dont want to spend on a new set of wheels, spacers are my what Ill ahve to go with..

Phill361

iTrader: (4)

Davidv has a few nice charts on spacers/offsets. Hopefully he'll see this thread and post in it.

omsin523

iTrader: (8)

ever seen those wheels before, they look very sunken in. Id go with the 25mm how wide are those wheels?

ttuberz

iTrader: (14)

im feelin this

killerbee

iTrader: (34)

Very nice padman, any more pics...front and rear?

Padman

iTrader: (1)

They are 18x8.5 +30. i like the look, just wish i would have known more about offset at the time. Anyways, nothing i can do now other than get rid of them or work with spacers.

And yea, wouldnt want Davidv to miss out on another post.

As for more picture, ill take some later. Its just a stock front bumper right now. I was looking into the N1 or the V2 front to get eventually. The rear is a Invidia g200 exhaust with a bumper tuck.

Thanks guys

black_03

iTrader: (21)

Any rear shots?

NissanZ03

iTrader: (12)

The rears are only 8.5 inches wide?

saywat?

yea looks extra sunk in for some reason like worst then 30 offset

Padman

iTrader: (1)

Great, thanks for pointing out the blatantly obvious. Pretty much the whole purpose of this thread... Its a +30.

saywat?

^lol no prob