DFW Tech Day
#101
Retired Admin
iTrader: (95)
actually motordyne sold the stock unmodified non-rev-up lower plenum as the MREV before the MREV+ or MREV2 and it has been dyno proven to increase torque when put on a rev-up engine:
https://my350z.com/forum/5341039-post8.html
http://g35driver.com/forums/g-spot/3...-manifold.html
Without the spacer your max HP might suffer but according to the engineers at at motordyne you can get gains with the spacer and stock-non-rev-up lower plenum and spacer, which would be greater than running the spacer alone on a rev-up engine
https://my350z.com/forum/5341039-post8.html
http://g35driver.com/forums/g-spot/3...-manifold.html
Without the spacer your max HP might suffer but according to the engineers at at motordyne you can get gains with the spacer and stock-non-rev-up lower plenum and spacer, which would be greater than running the spacer alone on a rev-up engine
#105
350Z-holic
Thread Starter
iTrader: (60)
Join Date: Jan 2006
Location: San Antonio/I miss DFW, TX
Posts: 11,204
Likes: 0
Received 29 Likes
on
20 Posts
Thought i would pass the word.
NTB Grapevine off 121 and grapevine mills
Offers a general Forum discount on their alignment specials. The guys that work there are moderators for some of DFW's import forums.
3 year unlimited alignment $127.49 w/tax included - regular $149.99 + tax
5 year unlimited alignment $161.49 w/tax included - regular $189.99 + tax
Also, look online, because sometimes there are specials
sign up with your email to receive specials as well at NTB.com
EDIT: They have an in-ground alignment rack. SO does the location at Campwisdom and 360 in Grand Prairie - which is less than a mile from my house. - so anyone wanting to do camber kit installs, etc can take care of alignment same day after the tech day install.
Also, I plan on doing some suspension install work on my own car, so im taking my car in on tech day to NTB also.....
-J
NTB Grapevine off 121 and grapevine mills
Offers a general Forum discount on their alignment specials. The guys that work there are moderators for some of DFW's import forums.
3 year unlimited alignment $127.49 w/tax included - regular $149.99 + tax
5 year unlimited alignment $161.49 w/tax included - regular $189.99 + tax
Also, look online, because sometimes there are specials
sign up with your email to receive specials as well at NTB.com
EDIT: They have an in-ground alignment rack. SO does the location at Campwisdom and 360 in Grand Prairie - which is less than a mile from my house. - so anyone wanting to do camber kit installs, etc can take care of alignment same day after the tech day install.
Also, I plan on doing some suspension install work on my own car, so im taking my car in on tech day to NTB also.....
-J
Last edited by JasonZ-YA; 02-05-2010 at 08:34 PM.
#107
350Z-holic
Thread Starter
iTrader: (60)
Join Date: Jan 2006
Location: San Antonio/I miss DFW, TX
Posts: 11,204
Likes: 0
Received 29 Likes
on
20 Posts
LIST BUMP - back on topic....
# --- Screen Name -Real name-- Car --- Mod to install
1 – JasonZ-YA- Jason – 350Z – Suspension install mods/arms - will be dropping my car off at NTB down the street once done for alignment. also clutch bleed with wilwood products mod.
2. AcidJake75 - 350z - Rear wiper delete (if its not done already) and help with installs and assist with beer drinkin..
3. - Fithamoto - 350Z - Front headlight & tail light swap.
4. - Corbin or Bluz370- 370z- mods spring mt mod (if its not done yet),and for sure diff and tranny fluid.
5 - Austin or AUS10TAT10US- 350Z - possibly need help painting headlights and handle, rear coilover adjustment (if not done already and yall can see my stock bumper blacked out and filled...just got it put on today!)
6. - Steve or Neverlift - 350z - SS brake lines and SS clutch Line. Flush clutch and brake fluid.
7. Squeaky350 - Jeremy - 350z - rear camber kit and toe bolts. lower car - coilovers already installed. stance
8. 3hree5ive0ero - Chris - 350Z - SS clutch line, flush clutch, hatch shocks (if not done).. maybe replace bushings
9. 05 ppw z33 - Joe - 350Z - Dehazing headlights and maybe fixing minor scratches
10. LegionnaireZ - Anthony - 350z - Would like to see if the dehaze will work. since the 19s are back on would like to test fit spacers. Stage 2 Strut Hatch.
11. MrWatchDawg - Mo - 350z - need all fluids changed , and hopefully i can do exhaust if i have it by than
12. ppat1989 - Patrick - replace all 4 brake rotors
HELPER LIST:
1. DarkRoam - - ---
2. Gibbs
3. cow
4. quakerroatmeal - Thinking of bringing some cleaning supplies and showing folks how to properly clean/dry/clay bar/wax a car if anybody is interested.
5. tsar - Maybe coilover / camber arm install.
6. JLSGOZ (Jody) I can be a good gopheress
# --- Screen Name -Real name-- Car --- Mod to install
1 – JasonZ-YA- Jason – 350Z – Suspension install mods/arms - will be dropping my car off at NTB down the street once done for alignment. also clutch bleed with wilwood products mod.
2. AcidJake75 - 350z - Rear wiper delete (if its not done already) and help with installs and assist with beer drinkin..
3. - Fithamoto - 350Z - Front headlight & tail light swap.
4. - Corbin or Bluz370- 370z- mods spring mt mod (if its not done yet),and for sure diff and tranny fluid.
5 - Austin or AUS10TAT10US- 350Z - possibly need help painting headlights and handle, rear coilover adjustment (if not done already and yall can see my stock bumper blacked out and filled...just got it put on today!)
6. - Steve or Neverlift - 350z - SS brake lines and SS clutch Line. Flush clutch and brake fluid.
7. Squeaky350 - Jeremy - 350z - rear camber kit and toe bolts. lower car - coilovers already installed. stance
8. 3hree5ive0ero - Chris - 350Z - SS clutch line, flush clutch, hatch shocks (if not done).. maybe replace bushings
9. 05 ppw z33 - Joe - 350Z - Dehazing headlights and maybe fixing minor scratches
10. LegionnaireZ - Anthony - 350z - Would like to see if the dehaze will work. since the 19s are back on would like to test fit spacers. Stage 2 Strut Hatch.
11. MrWatchDawg - Mo - 350z - need all fluids changed , and hopefully i can do exhaust if i have it by than
12. ppat1989 - Patrick - replace all 4 brake rotors
HELPER LIST:
1. DarkRoam - - ---
2. Gibbs
3. cow
4. quakerroatmeal - Thinking of bringing some cleaning supplies and showing folks how to properly clean/dry/clay bar/wax a car if anybody is interested.
5. tsar - Maybe coilover / camber arm install.
6. JLSGOZ (Jody) I can be a good gopheress
Last edited by JasonZ-YA; 02-02-2010 at 05:22 AM.
#110
350Z-holic
Thread Starter
iTrader: (60)
Join Date: Jan 2006
Location: San Antonio/I miss DFW, TX
Posts: 11,204
Likes: 0
Received 29 Likes
on
20 Posts
Drift event sunday!
SOooo, after all the mods are installed, we can go put them too the test!
Ill be attending the Drift event at Mineral Wells the next day - SUNDAY MARCH 7th.
http://www.fabricatedmotorsports.com/Events.html
I wanna start another list below as well for anyone interested in going out there to either participate or spectate........i can always use a hand unloading the car, swapping tires between runs, etc:
LIST BUMP - back on topic....
# --- Screen Name -Real name-- Car --- Mod to install
1 – JasonZ-YA- Jason – 350Z – Suspension install mods/arms - will be dropping my car off at NTB down the street once done for alignment. also clutch bleed with wilwood products mod.
2. AcidJake75 - 350z - Rear wiper delete (if its not done already) and help with installs and assist with beer drinkin..
3. - Fithamoto - 350Z - Front headlight & tail light swap.
4. - Corbin or Bluz370- 370z- mods spring mt mod (if its not done yet),and for sure diff and tranny fluid.
5 - Austin or AUS10TAT10US- 350Z - possibly need help painting headlights and handle, rear coilover adjustment (if not done already and yall can see my stock bumper blacked out and filled...just got it put on today!)
6. - Steve or Neverlift - 350z - SS brake lines and SS clutch Line. Flush clutch and brake fluid.
7. Squeaky350 - Jeremy - 350z - rear camber kit and toe bolts. lower car - coilovers already installed. stance
8. 3hree5ive0ero - Chris - 350Z - SS clutch line, flush clutch, hatch shocks (if not done).. maybe replace bushings
9. 05 ppw z33 - Joe - 350Z - Dehazing headlights and maybe fixing minor scratches
10. LegionnaireZ - Anthony - 350z - Would like to see if the dehaze will work. since the 19s are back on would like to test fit spacers. Stage 2 Strut Hatch.
11. MrWatchDawg - Mo - 350z - need all fluids changed , and hopefully i can do exhaust if i have it by than
12. ppat1989 - Patrick - replace all 4 brake rotors
HELPER LIST:
1. DarkRoam - - ---
2. Gibbs
3. cow
4. quakerroatmeal - Thinking of bringing some cleaning supplies and showing folks how to properly clean/dry/clay bar/wax a car if anybody is interested.
5. tsar - Maybe coilover / camber arm install.
6. JLSGOZ (Jody) I can be a good gopheress
DRIFT EVENT - SUNDAY MARCH 7th
1. JasonZ-YA - participate in event
2.
3.
4.
-J
Ill be attending the Drift event at Mineral Wells the next day - SUNDAY MARCH 7th.
http://www.fabricatedmotorsports.com/Events.html
I wanna start another list below as well for anyone interested in going out there to either participate or spectate........i can always use a hand unloading the car, swapping tires between runs, etc:
LIST BUMP - back on topic....
# --- Screen Name -Real name-- Car --- Mod to install
1 – JasonZ-YA- Jason – 350Z – Suspension install mods/arms - will be dropping my car off at NTB down the street once done for alignment. also clutch bleed with wilwood products mod.
2. AcidJake75 - 350z - Rear wiper delete (if its not done already) and help with installs and assist with beer drinkin..
3. - Fithamoto - 350Z - Front headlight & tail light swap.
4. - Corbin or Bluz370- 370z- mods spring mt mod (if its not done yet),and for sure diff and tranny fluid.
5 - Austin or AUS10TAT10US- 350Z - possibly need help painting headlights and handle, rear coilover adjustment (if not done already and yall can see my stock bumper blacked out and filled...just got it put on today!)
6. - Steve or Neverlift - 350z - SS brake lines and SS clutch Line. Flush clutch and brake fluid.
7. Squeaky350 - Jeremy - 350z - rear camber kit and toe bolts. lower car - coilovers already installed. stance
8. 3hree5ive0ero - Chris - 350Z - SS clutch line, flush clutch, hatch shocks (if not done).. maybe replace bushings
9. 05 ppw z33 - Joe - 350Z - Dehazing headlights and maybe fixing minor scratches
10. LegionnaireZ - Anthony - 350z - Would like to see if the dehaze will work. since the 19s are back on would like to test fit spacers. Stage 2 Strut Hatch.
11. MrWatchDawg - Mo - 350z - need all fluids changed , and hopefully i can do exhaust if i have it by than
12. ppat1989 - Patrick - replace all 4 brake rotors
HELPER LIST:
1. DarkRoam - - ---
2. Gibbs
3. cow
4. quakerroatmeal - Thinking of bringing some cleaning supplies and showing folks how to properly clean/dry/clay bar/wax a car if anybody is interested.
5. tsar - Maybe coilover / camber arm install.
6. JLSGOZ (Jody) I can be a good gopheress
DRIFT EVENT - SUNDAY MARCH 7th
1. JasonZ-YA - participate in event
2.
3.
4.
-J
#111
Registered User
iTrader: (1)
Join Date: Dec 2009
Location: fairview
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
# --- Screen Name -Real name-- Car --- Mod to install
1 – JasonZ-YA- Jason – 350Z – Suspension install mods/arms - will be dropping my car off at NTB down the street once done for alignment. also clutch bleed with wilwood products mod.
2. AcidJake75 - 350z - Rear wiper delete (if its not done already) and help with installs and assist with beer drinkin..
3. - Fithamoto - 350Z - Front headlight & tail light swap.
4. - Corbin or Bluz370- 370z- mods spring mt mod (if its not done yet),and for sure diff and tranny fluid.
5 - Austin or AUS10TAT10US- 350Z - possibly need help painting headlights and handle, rear coilover adjustment (if not done already and yall can see my stock bumper blacked out and filled...just got it put on today!)
6. - Steve or Neverlift - 350z - SS brake lines and SS clutch Line. Flush clutch and brake fluid.
7. Squeaky350 - Jeremy - 350z - rear camber kit and toe bolts. lower car - coilovers already installed. stance
8. 3hree5ive0ero - Chris - 350Z - SS clutch line, flush clutch, hatch shocks (if not done).. maybe replace bushings
9. 05 ppw z33 - Joe - 350Z - Dehazing headlights and maybe fixing minor scratches
10. LegionnaireZ - Anthony - 350z - Would like to see if the dehaze will work. since the 19s are back on would like to test fit spacers. Stage 2 Strut Hatch.
11. MrWatchDawg - Mo - 350z - need all fluids changed , and hopefully i can do exhaust if i have it by than
12. ppat1989 - Patrick - replace all 4 brake rotors
13. zrzly? and christinekay-Justin and Christine- basic fluid stuffs (oil change, tranny, and maybe clutch fluid. will bring four jackstands and tools.
HELPER LIST:
1. DarkRoam - - ---
2. Gibbs
3. cow
4. quakerroatmeal - Thinking of bringing some cleaning supplies and showing folks how to properly clean/dry/clay bar/wax a car if anybody is interested.
5. tsar - Maybe coilover / camber arm install.
6. JLSGOZ (Jody) I can be a good gopheress
DRIFT EVENT - SUNDAY MARCH 7th
1. JasonZ-YA - participate in event
2.
3.
4.
-J[/QUOTE]
1 – JasonZ-YA- Jason – 350Z – Suspension install mods/arms - will be dropping my car off at NTB down the street once done for alignment. also clutch bleed with wilwood products mod.
2. AcidJake75 - 350z - Rear wiper delete (if its not done already) and help with installs and assist with beer drinkin..
3. - Fithamoto - 350Z - Front headlight & tail light swap.
4. - Corbin or Bluz370- 370z- mods spring mt mod (if its not done yet),and for sure diff and tranny fluid.
5 - Austin or AUS10TAT10US- 350Z - possibly need help painting headlights and handle, rear coilover adjustment (if not done already and yall can see my stock bumper blacked out and filled...just got it put on today!)
6. - Steve or Neverlift - 350z - SS brake lines and SS clutch Line. Flush clutch and brake fluid.
7. Squeaky350 - Jeremy - 350z - rear camber kit and toe bolts. lower car - coilovers already installed. stance
8. 3hree5ive0ero - Chris - 350Z - SS clutch line, flush clutch, hatch shocks (if not done).. maybe replace bushings
9. 05 ppw z33 - Joe - 350Z - Dehazing headlights and maybe fixing minor scratches
10. LegionnaireZ - Anthony - 350z - Would like to see if the dehaze will work. since the 19s are back on would like to test fit spacers. Stage 2 Strut Hatch.
11. MrWatchDawg - Mo - 350z - need all fluids changed , and hopefully i can do exhaust if i have it by than
12. ppat1989 - Patrick - replace all 4 brake rotors
13. zrzly? and christinekay-Justin and Christine- basic fluid stuffs (oil change, tranny, and maybe clutch fluid. will bring four jackstands and tools.
HELPER LIST:
1. DarkRoam - - ---
2. Gibbs
3. cow
4. quakerroatmeal - Thinking of bringing some cleaning supplies and showing folks how to properly clean/dry/clay bar/wax a car if anybody is interested.
5. tsar - Maybe coilover / camber arm install.
6. JLSGOZ (Jody) I can be a good gopheress
DRIFT EVENT - SUNDAY MARCH 7th
1. JasonZ-YA - participate in event
2.
3.
4.
-J[/QUOTE]
#112
350Z-holic
Thread Starter
iTrader: (60)
Join Date: Jan 2006
Location: San Antonio/I miss DFW, TX
Posts: 11,204
Likes: 0
Received 29 Likes
on
20 Posts
no problem on the main fluid flushes you guys...
BUT, see my post11 on this thread about the clutch fluid flush! if you guys wanna do the clutch, ensure you purchase the wilwood products and all the parts by then.
pm me your email and i can fwd you a wilwood quote with the itemized parts on the email they sent me so there is no confusion.
Neverlift and I will be doing this to our cars this day as well! i already ordered the wilwood parts for me!
-J
#113
Registered User
Join Date: Jan 2007
Location: Dallas
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
Will y'all still be cranking around 2:30-3:00 ish? I have work till 2 that day and I would be coming from downtown.
I would like to help and learn about some stuff if possible. I got some coilovers to put on but I would like to do them myself in my garage, so maybe I can shadow someone and learn a few things.
I would like to help and learn about some stuff if possible. I got some coilovers to put on but I would like to do them myself in my garage, so maybe I can shadow someone and learn a few things.
#116
Registered User
Join Date: Jan 2007
Location: Dallas
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
Hey Jason, I was wondering how do you like your cordless impacts? I was thinking about getting a Makita one. Are they strong enough to spin bolts out? IE. changing out suspension.
#117
350Z-holic
Thread Starter
iTrader: (60)
Join Date: Jan 2006
Location: San Antonio/I miss DFW, TX
Posts: 11,204
Likes: 0
Received 29 Likes
on
20 Posts
http://toolmonger.com/wp-content/upl...oodyear24v.jpg
last i checked though, they werent stocking them anymore and now have one called the: 24volt Allegheny Cordless impact.
http://images.fixya.com/I/Impact/118...7276656b51.jpg
my brother in law has the allegheny and it works just as great - i honestly think they are the same thing, just labled different/differnt housing.
I would say get one of those for sure.
they work great on any spot really with the right extensions, wobble extensions, etc....
both are about 99 bucks usually, and sometimes on sale for 79.99.
-J
#119
Registered User
iTrader: (40)
Join Date: Jul 2007
Location: Fairborn, OH
Posts: 976
Likes: 0
Received 0 Likes
on
0 Posts
Jason, could you help me out with installing front cambers? I noticed you'll be doing some suspension work that day and I need to get rid of my SPCs and replace it with SPLs. As you can see I'm already on the list but I would like to make this my priority now instead.
-Joe
-Joe
#120
350Z-holic
Thread Starter
iTrader: (60)
Join Date: Jan 2006
Location: San Antonio/I miss DFW, TX
Posts: 11,204
Likes: 0
Received 29 Likes
on
20 Posts
Jason, could you help me out with installing front cambers? I noticed you'll be doing some suspension work that day and I need to get rid of my SPCs and replace it with SPLs. As you can see I'm already on the list but I would like to make this my priority now instead.
-Joe
-Joe
afterwards you will need an alignment.. NTB and Firestone are both near my house.
just bump the list and add SPL UCA's to your name..
-J