Where can I can Non Foulers for test pipes?

I heard that they are spark plug non-foulers and you have to drill them out or something like that.

Can I get them at a local automotive store? (Pep Boys)

Charles, I think I am finally going to do it!

 

u can get them anywhere,

 

Advance Auto - Help P/N 42009

You need 2 sets. You'll need to drill out the end of 1 pair so the O2 sensor can fit all the way in. Then you stack 2 on the test pipe and install the O2 into the non-foulers.

 

the foulers haven't been working on my test pipes though. With emissions coming up in february I have to figure out something fast.

 

Like many forum members I bought mine from Zexy. Drilled and ready to install.

 

they work on mine! an di have an 06! i guess i got lucky.

 

DOn't u have coilovers now? Just drop the car to like 1 inch from the ground. Take it to emission and they will extend the emission test for 2 years. That's what I did

 

yea slam that ***** slim...
i got a waiver to!

 

Thanks Dave!

Saw you driving the truck with the dog today. How r u?

 

i have my stock cats that you can borrow if you need them...just bring them back because I will need them for the same reason in about 11 months!

LOL

contact Chris at Elite from the G forums...he has them in stock no drilling required...just dont know how much they are from him...let me know if you need the number..

Elite is off Ft. Mead road...near Ft Mead...obviously...lol

 

I'll being going to chris tomorrow. Gotta get this done by the 24th! So if my car is slammed I'll pass?

 

It all depends on the situation. When you hit up an emission station, usually the guy that works there would tell you to leave your car with the key in it and he'll drive it onto the roller. But since your car is slammed, the guy might ask you to drive it onto the roller yourself. All you have to do is refusing to do so. They don't have insurance to cover damage to your car and they sure don't want to lose their job. So in that case, they'd have to get their managers and the manager usually give you a 2 years extension. So you didn't officially pass, but you have 2 more years to get your emission done

 

my father keeps tellin me I don't need to go on the rollers cause my car isn't that old. So confused

 

Hey Chris, if you buy my spoiler I'll throw in a set of Ichiban resonated test pipes with foulers already installed!

 

To pass through the emission station, the car WILL have to go through the rollers. They won't actually use the rollers since they can just plug a computer to your car to get all the reads. But regardless the car will have to pass through the roller and a slammed car would not make it without any damage.

 

In Maryland? No. They just check OBDII. If you have no codes you are good to go.

 

same in VA now....went to NISSAN dealer....5 minutes...25 bucks!

OBDII FTW...

also if you reset a SES light...make sure you drive your car at least 50 miles so that it FULLY clears!

Good luck. I have a scanner (OBDII Scanner) that can reset the light for you if you need it.

 

Oh, yeah.. forgot to ask.

There is an extra set of bungs for wideband tuning/AF monitoring, what do I plug these up with?

 

Anything that fits

 

a bung plug.. go to napa or whatever.