Awsome way to start out the morning... =/
#46
Registered User
iTrader: (4)
My town house garage is total fial. Large enough to fit my car and wedge1 bike somewhat behind it at an angle. I have ZERO room for error.
#48
Registered User
Thread Starter
iTrader: (2)
Join Date: Mar 2007
Location: Maryland
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
Sooo....it's looking like they might "total" my car. The repairs will cost about $9000...which is about 75% of what the vehicle is worth. I'm stuck...and I don't know what to do.
#49
Registered User
iTrader: (7)
Join Date: May 2008
Location: Hamsterdam, Baltimore
Posts: 3,797
Likes: 0
Received 0 Likes
on
0 Posts
Cant you just buy it back? I mean, it kinda seems like it might work out for you.... There is obviously nothing wrong with it.
https://my350z.com/forum/mid-atlanti...ml#post7144752
https://my350z.com/forum/mid-atlanti...ml#post7144752
#51
Registered User
Thread Starter
iTrader: (2)
Join Date: Mar 2007
Location: Maryland
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
Good news!
The adjuster just called a little while ago...they are NOT going to total the car. He "appraised" it at $18,111. I don't know where in the hell he got that number from, but I'm happy.
I'll be getting a nice check in the mail.
NOW, the question is...what wheel/tire set up can I get and still stay in BS class for autox?
The adjuster just called a little while ago...they are NOT going to total the car. He "appraised" it at $18,111. I don't know where in the hell he got that number from, but I'm happy.
I'll be getting a nice check in the mail.
NOW, the question is...what wheel/tire set up can I get and still stay in BS class for autox?
#52
Registered User
iTrader: (2)
Join Date: Aug 2008
Location: Greensboro, NC
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Cant you just buy it back? I mean, it kinda seems like it might work out for you.... There is obviously nothing wrong with it.
https://my350z.com/forum/mid-atlanti...ml#post7144752
https://my350z.com/forum/mid-atlanti...ml#post7144752
#54
Registered User
iTrader: (2)
Join Date: Aug 2008
Location: Greensboro, NC
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
The following modifications are allowed in stock class:
• Appearance, comfort and convenience options, e. g. gauges, alarms, turbo timers, shift *****.
• Removal of spare tire, tools and jack.
• Harness (seat belts cannot be removed), must be DOT approved.
• Any DOT approved tires (see rules for restrictions), including R-compounds, of any size (no modification of fender well, no rolling fenders, removing liners, tires can’t rub a hole into the liner either).
• Wheels (stock size only, offset within 0.25"/6mm of stock).
• Wheel spacers (resulting offset within 0.25"/6mm of stock).
• Lug nuts.
• Brake pads, speed bleeders.
• Shocks that maintain stock ride height, can be adjustable. See rule book for details!
• Front sway bar.
• Different alignment using factory adjustments (no camber bolts).
• Spark plugs.
• Air filter element can be removed or replaced.
• Cat-back exhaust.
AND
WHEELS
Any type wheel may be used provided it complies with the following:
it is the same width and diameter as standard, and as installed
(including wheel spacers if applicable) it does not have an offset
more than +/- 0.25 inch from a standard wheel for the car. The
resultant change in track dimensions is allowed.
Wheel spacers are permitted, provided the resultant combination
complies with the offset requirements of this section. Wheel studs,
lug nuts, and/or bolt length may be changed.
Copied from SCCA.com
• Appearance, comfort and convenience options, e. g. gauges, alarms, turbo timers, shift *****.
• Removal of spare tire, tools and jack.
• Harness (seat belts cannot be removed), must be DOT approved.
• Any DOT approved tires (see rules for restrictions), including R-compounds, of any size (no modification of fender well, no rolling fenders, removing liners, tires can’t rub a hole into the liner either).
• Wheels (stock size only, offset within 0.25"/6mm of stock).
• Wheel spacers (resulting offset within 0.25"/6mm of stock).
• Lug nuts.
• Brake pads, speed bleeders.
• Shocks that maintain stock ride height, can be adjustable. See rule book for details!
• Front sway bar.
• Different alignment using factory adjustments (no camber bolts).
• Spark plugs.
• Air filter element can be removed or replaced.
• Cat-back exhaust.
AND
WHEELS
Any type wheel may be used provided it complies with the following:
it is the same width and diameter as standard, and as installed
(including wheel spacers if applicable) it does not have an offset
more than +/- 0.25 inch from a standard wheel for the car. The
resultant change in track dimensions is allowed.
Wheel spacers are permitted, provided the resultant combination
complies with the offset requirements of this section. Wheel studs,
lug nuts, and/or bolt length may be changed.
Copied from SCCA.com