Kevin's VQ35DE Fully Built NA Motor
#61
Registered User
Thread Starter
Join Date: Apr 2009
Location: South Florida
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Base tune done, ProEFI running well. Now time for some real tuning and to see where we end up at. Here are a couple videos of the car/sound/and just the shop and you'll see the Mustang that was holding up the car the whole time at TPS.
Overall shot of the new setup.
BBK 75MM Drive by Cable Throttle body, looks nice and clean as they fabbed up a spacer to connect it to the intake manifold.
ProEFI Pro 48 ECU Mounted there.
You can see how we mounted the Idle Air Control Valve right there to the Throttle body and in the videos you'll here it.
Few videos you can check out.
Some car and you can see the IAC working.
http://www.youtube.com/watch?v=bGYiMe37WL0
Car revving
http://www.youtube.com/watch?v=7Qbo32eu1h8
Just a shop walk through. There is the mustang that held up my car for so long in the beginning of the video.
http://www.youtube.com/watch?v=tj1qEN30NTQ
Overall shot of the new setup.
BBK 75MM Drive by Cable Throttle body, looks nice and clean as they fabbed up a spacer to connect it to the intake manifold.
ProEFI Pro 48 ECU Mounted there.
You can see how we mounted the Idle Air Control Valve right there to the Throttle body and in the videos you'll here it.
Few videos you can check out.
Some car and you can see the IAC working.
http://www.youtube.com/watch?v=bGYiMe37WL0
Car revving
http://www.youtube.com/watch?v=7Qbo32eu1h8
Just a shop walk through. There is the mustang that held up my car for so long in the beginning of the video.
http://www.youtube.com/watch?v=tj1qEN30NTQ
#63
Registered User
Thread Starter
Join Date: Apr 2009
Location: South Florida
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
#65
Registered User
Thread Starter
Join Date: Apr 2009
Location: South Florida
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
#66
Former Sponsor
iTrader: (564)
Join Date: Feb 2003
Location: Long Island, New York
Posts: 19,266
Likes: 0
Received 5 Likes
on
5 Posts
gotcha - if you have any details on the setup, shoot me a pm, would be nice to integrate it into mine as well (looks like we're using the same, if not similar, throttle body)
#67
interested in the TBsetup with that iacv as well. im currently using a pathfinder TB with my setup but im thinking on going bigger now that i got the car running and tuned.
Last edited by happy4444; 01-31-2010 at 04:20 PM.
#69
Registered User
Thread Starter
Join Date: Apr 2009
Location: South Florida
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Alright, well got the air/fuel going pretty well. Did not get into the cam timing at all and there is still work to be done fine tuning that and the a/f ratio but we do have a good power dyno. 299.2whp. If and when the tuner gets a chance he'll get back on it in a couple weeks to see how much we can squeeze out of the C2 Cams here. I'm definitely pretty satisfied and until Barry has a dyno this is the highest NA B15 sentra I believe. And we do still have work to be done as we tidy things up and a few other tricks up our sleeve in the next few weeks to come. 8-) Here is a picture and I will post the videos once they upload to youtube. And this dyno is known to read right on the money and to be the dream killer for those anticipating more.
and the HD videos
299.2WHP dyno
http://www.youtube.com/watch?v=ZTjC3UcgX1Q
3rd gear highway pull
http://www.youtube.com/watch?v=bDhf0xf4cHs
and the HD videos
299.2WHP dyno
http://www.youtube.com/watch?v=ZTjC3UcgX1Q
3rd gear highway pull
http://www.youtube.com/watch?v=bDhf0xf4cHs
Last edited by kgkeen101; 02-19-2010 at 08:39 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM