I';m liking the looks of this piece. I'm thinking the plenum itself has some promise. When you get aroudn to it, can you also post a pic of the power steering pump placement. I've been wanting to put mine on the driver's side and I think it is on the "front" side of the FWD Nissans. Also please shoot me the part number of the plunem, there is enough meat on that to really pull some thing off better than what is currently on the Z, stcok wise that is.

Thanks for posting, good luck with your build, go big!

 

Awesome!

 

awesome, what part of charlotte will i be seeing this around?

 

Welcome to the club and I love all the eye candy you have. Great job on doing this yourself!

 

Actually the ps pump is right below the passenger side strut. Here's a pic of where it is mounted on the Maxima motor. You don't see the pump, but you see where it goes by the bracket.



I'm usually all over the area, from Huntersville down to Ballantyne, but I live in the Ballantyne area towards Ft. Mill.

Thanks sir! You've been a great deal of help with talking to you in the past, and keeping up with the things that you have accomplished. Thanks again!

 

Suck fest! daxxit. I need a FWD setup that uses the same/simlar PS pump on the grill side just as an example. grrrrr. Thanx for the effort tho!

 

4 Pulls
3rd Gear Pull
100% Throttle
1950rpms - 6500rpms


[youtube]<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/CsKRKi_fzBc&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/CsKRKi_fzBc&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>[/youtube]

 

Dyno plots? Numbers?

 

I notice by the picture of the manifold elbow that you did some work on it, did you completely remove the shelf on the elbow?