latest update to the niZmo
Thread Starter
Registered User
iTrader: (19)
Joined: Apr 2007
Posts: 1,395
Likes: 0
From: Houston,TX
sparco evo L seat and wiper removed.
<a href="http://picasaweb.google.com/lh/photo/F5ozAJP7rpKrqvO4u0r7mg?feat=embedwebsite"><img src="http://lh5.ggpht.com/_txRK3mmWgA0/SWvM3oDnSKI/AAAAAAAAEn4/QNBSQSxG7C4/s800/DSC01686.JPG" /></a>
<a href="http://picasaweb.google.com/lh/photo/BSrTM2Ak0Rok5JSXIiAHXg?feat=embedwebsite"><img src="http://lh4.ggpht.com/_txRK3mmWgA0/SWvM0gjuvsI/AAAAAAAAEnw/wM_aXdsZZCU/s800/DSC01683.JPG" /></a>
<a href="http://picasaweb.google.com/lh/photo/F5ozAJP7rpKrqvO4u0r7mg?feat=embedwebsite"><img src="http://lh5.ggpht.com/_txRK3mmWgA0/SWvM3oDnSKI/AAAAAAAAEn4/QNBSQSxG7C4/s800/DSC01686.JPG" /></a>
<a href="http://picasaweb.google.com/lh/photo/BSrTM2Ak0Rok5JSXIiAHXg?feat=embedwebsite"><img src="http://lh4.ggpht.com/_txRK3mmWgA0/SWvM0gjuvsI/AAAAAAAAEnw/wM_aXdsZZCU/s800/DSC01683.JPG" /></a>
Trending Topics
Thread Starter
Registered User
iTrader: (19)
Joined: Apr 2007
Posts: 1,395
Likes: 0
From: Houston,TX
yes :-)
who sold me the seat gave me a nismo airbag harness (2ohm resistor.. )
but doesn't work with the 07+ harness, so I did tap it in.. and no srs light
(disconnect the battery before)
about the squirter plug... no squirter plug
who sold me the seat gave me a nismo airbag harness (2ohm resistor.. )
but doesn't work with the 07+ harness, so I did tap it in.. and no srs light
about the squirter plug... no squirter plug
Thanks in advance
Thread Starter
Registered User
iTrader: (19)
Joined: Apr 2007
Posts: 1,395
Likes: 0
From: Houston,TX
i just tapped the nismo connector cables to the airbag cables using 2 of those.
I had to cut the connector on the nismo stuff..
than follow the procedure to reset your light (it's in the DIY interior section of the forum) and, more important, check which kind of error you have. probably if you used the 2ohm resistor.. you have something loose somewhere.
I had to cut the connector on the nismo stuff..
than follow the procedure to reset your light (it's in the DIY interior section of the forum) and, more important, check which kind of error you have. probably if you used the 2ohm resistor.. you have something loose somewhere.
Thread Starter
Registered User
iTrader: (19)
Joined: Apr 2007
Posts: 1,395
Likes: 0
From: Houston,TX
I don't think so... unless they will start allowing passengers on hpde.
in that case... the passenger has to give me the money for the seat and harness... now I can give him/her a cglock for free
next (and more or less last) interior mod is going to be a works bell quick disconnect and a momo 07 or 08 steering wheel (I have to figure if I feel better 70 or 90mm deep dish)
in that case... the passenger has to give me the money for the seat and harness... now I can give him/her a cglock for free

next (and more or less last) interior mod is going to be a works bell quick disconnect and a momo 07 or 08 steering wheel (I have to figure if I feel better 70 or 90mm deep dish)
Thread
Thread Starter
Forum
Replies
Last Post
Workshop12
Exterior & Interior
256
Mar 23, 2020 01:45 PM
AbyteZero
Engine, Drivetrain & Forced-Induction (DIY)
3
Sep 22, 2015 09:17 AM






