350Z_LEE

iTrader: (9)

I found an adapter on ebay for cheaper, looks the same as the aam one, before i order it, was wondering if i could get some feedback on it. Should it work the same? I needa order it today, so thanks in advance for feedback. Here is the link to the one on ebay.

http://cgi.ebay.com/ebaymotors/NRG-F...QQcmdZViewItem

here is the aam one:

http://www.alteredatmosphere.com/mm5...y_Code=350Z_FS

350Z_LEE

iTrader: (9)

just noticed a similar topic a few down, but different question!!

350Z_LEE

iTrader: (9)

or is this the same thing ?

http://www.courtesyparts.com/Merchan...Category_Code=

Old School

iTrader: (28)

i would use the AAM, PTP, or the one Jeremy (Audible Mayhem) is having made. That one just looks funny. Dunno if I'd risk my $35k car just to save a couple bucks.....use what you know works.

Old School

iTrader: (28)

That one is good.

350Z_LEE

iTrader: (9)

awesome thanks, now with the one from courtesy, i'll need an adapter and 2 o rings. says they just sell 1 o ring. I just wanna make sure i get the right **** the first order.

Old School

iTrader: (28)

mine only came with one and that's all I needed...they break easy so spares are a good idea

Cux350z

iTrader: (162)

call ptp up, they include the orings and necessary hardware. Its alot easier when its all bundled together. Theyres is like 60 bucks, shipped.

that ebay one is crap and probably not nearly as easy to install and the others.

Alberto

iTrader: (14)

One o-ring is inside the factory adapter, so you take that off and add the one that comes with the adapter and your good to go-in other words, you only need 1 additional adapter. Oil/grease them up so you dont break them.

350Z_LEE

iTrader: (9)

cool, ill prolly call ptp. looking for the # now.

Audible Mayhem

iTrader: (48)

i know a good place to get them as well if you pm me....


thanks

350Z_LEE

iTrader: (9)

sent pm Jeremy, i need some stainless steel line too!

MikeEwithTheZ

iTrader: (11)

make sure you use lube when putting the O-ring oarts together