to those of you using a WOT switch. how are you using it? how did you hook it up? im completely stuck at this point and am 2 seconds away from superglueing it to my pedal haha. also where is everyone cutting there fuel lines?

 

Dump the manual wot switch and get a window switch. Don't cut your fuel rail and get one of these:
http://www.dynotunenitrous.com/store...?idproduct=245

Download the instructions off of their website, the one for the Z/G before doing anything. Has a lot of information in it and probably will answer a lot of your questions.
Don't be hasty, read more in the nitrous forums before doing anything. Just like from your other thread, you went ahead instead of waiting for an answer or trying to find it, you never know, that could have fried your solenoids or electrical system some how. If you are installing this yourself, be patient, there is plenty of knowledge here in the forums.

 

this isnt my first rodio with spray. last one i had it on was a civic though and was much simpler. i only used a 6v battery to test them i wasnt about to slap it on a 12v

 

The questions you asked made it seem that way, lol. Good luck with your install. Make sure you post pics when you're done.

 

bottle is mounted behind driver seat already. most of its wired up. im just still figuring out where im going to tap the line and mount the wot switch

 

I'll be sellingmy windowswitch inabout a week when I get home if you are interested

 

I use an WOT switch. The manual ones don't work. I have NX Express, it's pretty easy to hook up. Which one do you have? I also cut my fuel line. Apparently, that's the wrong answer. I just inserted a brass "T" fitting.

 

i dont have the money for a window switch nor the fuel line adapter so ill be figuring out some way of fitting a manual WOT switch in. probably end up screwing it into the side of the pedal or something