Louisiana Z/Import cookout April 29th *Lakefront*
#7026
Registered User
iTrader: (19)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Well I installed my popcharger after work yesterday. First impression was "Wow, I can't be I waited so long to do this. It's like an instant 100hp. Imagine this with 150 shot." Okay, so I'm lying. On a serious note, I may have gain a little but it's so hard to tell when you gain power so minor. I do think I gain a little though. It looks so much better than the stock box. I went for a ride after installing it. It was at about 7:30ish last night so it was kinda cool out, much cooler than noon. It sounds great to me. There's a little deeper sound and a whistle in the lower rpms. It produces a louder, deeper sound when getting into the higher rpms. Overall, I'm pleased with it. We'll have to wait and see if I have actual gains from this or not on the dyno. I want fuction over form so if I lose power, I will be putting back on the stock box. Here are some pics.
![Big Grin](https://my350z.com/forum/images/smilies/biggrin.gif)
![Louisiana Z/Import cookout April 29th *Lakefront*-smaller-dsc01057.jpg](https://my350z.com/forum/attachments/nolazcc/149503d1181305501t-louisiana-z-import-cookout-april-29th-lakefront-smaller-dsc01057.jpg)
![Louisiana Z/Import cookout April 29th *Lakefront*-smaller-dsc01058.jpg](https://my350z.com/forum/attachments/nolazcc/149504d1181305501t-louisiana-z-import-cookout-april-29th-lakefront-smaller-dsc01058.jpg)
![Louisiana Z/Import cookout April 29th *Lakefront*-smaller-dsc01059.jpg](https://my350z.com/forum/attachments/nolazcc/149505d1181305501t-louisiana-z-import-cookout-april-29th-lakefront-smaller-dsc01059.jpg)
#7027
Registered User
Thread Starter
iTrader: (16)
Join Date: Oct 2006
Location: *New Orleans*
Posts: 4,744
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by DustinZ33
Well I installed my popcharger after work yesterday. First impression was "Wow, I can't be I waited so long to do this. It's like an instant 100hp. Imagine this with 150 shot." Okay, so I'm lying. On a serious note, I may have gain a little but it's so hard to tell when you gain power so minor. I do think I gain a little though. It looks so much better than the stock box. I went for a ride after installing it. It was at about 7:30ish last night so it was kinda cool out, much cooler than noon. It sounds great to me. There's a little deeper sound and a whistle in the lower rpms. It produces a louder, deeper sound when getting into the higher rpms. Overall, I'm pleased with it. We'll have to wait and see if I have actual gains from this or not on the dyno. I want fuction over form so if I lose power, I will be putting back on the stock box. Here are some pics.
Attachment 149503 Attachment 149504 Attachment 149505
![Big Grin](https://my350z.com/forum/images/smilies/biggrin.gif)
Attachment 149503 Attachment 149504 Attachment 149505
![Big Grin](https://my350z.com/forum/images/smilies/biggrin.gif)
#7031
Registered User
Thread Starter
iTrader: (16)
Join Date: Oct 2006
Location: *New Orleans*
Posts: 4,744
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by BloMyS14
Will did you shave your head yet?
the maf is going to be on that other engine... i might try and go get that engine here in another week... there are a few things off of it i want/need and when i do, i will get ahold of that maf and swap out my intake and then you can have it.
#7033
Registered User
iTrader: (19)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by sumfknguy
this weekend man.. this weekend..
the maf is going to be on that other engine... i might try and go get that engine here in another week... there are a few things off of it i want/need and when i do, i will get ahold of that maf and swap out my intake and then you can have it.
the maf is going to be on that other engine... i might try and go get that engine here in another week... there are a few things off of it i want/need and when i do, i will get ahold of that maf and swap out my intake and then you can have it.
![Big Grin](https://my350z.com/forum/images/smilies/biggrin.gif)
#7036
Registered User
Thread Starter
iTrader: (16)
Join Date: Oct 2006
Location: *New Orleans*
Posts: 4,744
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by DustinZ33
What other engine? Are you purchasing another engine?![Big Grin](https://my350z.com/forum/images/smilies/biggrin.gif)
![Big Grin](https://my350z.com/forum/images/smilies/biggrin.gif)
a 05 non-revup is sitting in my buddies shop.. 6k miles on it.. gonna buy it and put it in storage that way if i ever decide to go FI or spray, i have a backup...
I am getting rid of my intake due to heatsoak. gonna replace it with a stillen intake. Bradley wants my K&N setup and is gonna fab something together to work with this stock air box but needed an extra MAF housing for the flange. So when i get that other engine i was gonna give him the housing.
#7037
Registered User
Thread Starter
iTrader: (16)
Join Date: Oct 2006
Location: *New Orleans*
Posts: 4,744
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by DustinZ33
You're a coffee drinker too, huh!! I just came back from fixing another cup.
its that or run around drag'n *** all day...
#7038
Registered User
iTrader: (29)
Join Date: Apr 2005
Location: Get out my way pimpin, LA
Posts: 33,731
Likes: 0
Received 1 Like
on
1 Post
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by sumfknguy
as a matter of fact yeah.. lol
a 05 non-revup is sitting in my buddies shop.. 6k miles on it.. gonna buy it and put it in storage that way if i ever decide to go FI or spray, i have a backup...
I am getting rid of my intake due to heatsoak. gonna replace it with a stillen intake. Bradley wants my K&N setup and is gonna fab something together to work with this stock air box but needed an extra MAF housing for the flange. So when i get that other engine i was gonna give him the housing.
a 05 non-revup is sitting in my buddies shop.. 6k miles on it.. gonna buy it and put it in storage that way if i ever decide to go FI or spray, i have a backup...
I am getting rid of my intake due to heatsoak. gonna replace it with a stillen intake. Bradley wants my K&N setup and is gonna fab something together to work with this stock air box but needed an extra MAF housing for the flange. So when i get that other engine i was gonna give him the housing.
I'll be getting the Stillen but I want to get a tune first
![Stick Out Tongue](https://my350z.com/forum/images/smilies/tongue.gif)
#7039
Registered User
iTrader: (19)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by sumfknguy
as a matter of fact yeah.. lol
a 05 non-revup is sitting in my buddies shop.. 6k miles on it.. gonna buy it and put it in storage that way if i ever decide to go FI or spray, i have a backup...
I am getting rid of my intake due to heatsoak. gonna replace it with a stillen intake. Bradley wants my K&N setup and is gonna fab something together to work with this stock air box but needed an extra MAF housing for the flange. So when i get that other engine i was gonna give him the housing.
a 05 non-revup is sitting in my buddies shop.. 6k miles on it.. gonna buy it and put it in storage that way if i ever decide to go FI or spray, i have a backup...
I am getting rid of my intake due to heatsoak. gonna replace it with a stillen intake. Bradley wants my K&N setup and is gonna fab something together to work with this stock air box but needed an extra MAF housing for the flange. So when i get that other engine i was gonna give him the housing.
#7040
Registered User
Thread Starter
iTrader: (16)
Join Date: Oct 2006
Location: *New Orleans*
Posts: 4,744
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by DustinZ33
So he wants to use the intake tube that you have and connect it to his stock air box? Why? Isn't the stock tube good enough?