Detroit Area Z List part 3
i ordered hoses too there on backorder 152 shipped i bleive ws the final price from performance nissan. we should get togheer and do them all together 
but i gota wait till spring to do mine because if its below 50 out all i do is complain about how cold i am.... yancy or anybody else who konws... if its 75 bucks an hour to dyno how long does it take 2-3 hours ? how many runs when u gusy say he tunes it does that mean he changes stuff on the ecu ? ive been reading latley that any mod done without a tune is worthless car just adjusts itself back to stock setting
but i gota wait till spring to do mine because if its below 50 out all i do is complain about how cold i am.... yancy or anybody else who konws... if its 75 bucks an hour to dyno how long does it take 2-3 hours ? how many runs when u gusy say he tunes it does that mean he changes stuff on the ecu ? ive been reading latley that any mod done without a tune is worthless car just adjusts itself back to stock setting
As far as tuning, you're pretty limited if you only have the stock ECU. Without a means to change the stock ECU settings or trick it with a piggy back computer, not much can be done. Godspeed (nor anyone else in MI as far as I know) does not have the means to change the paramaters of the stock ECU.
Several options are available (1) reflash the stock ECU via Technosquare or (2) add a piggy back computer such as a Greddy E-01 to trick or override the stock ECU settings.
I have both of these things done to my Z. Technosquare is a company in CA so you have to remove your ECU and send it to them with a list of the mods that you have on your car. They can do things to the ECU like adjust air/fuel, timing, speed limiter, rev limiter, etc. The cost is somewhere around $600 if I remember right. A piggy back computer (depending on what one you go with) can override the stock ECU and control things like timing, air/fuel mixture, etc. The Greddy E-01 is around $500 if I remember right.
Several options are available (1) reflash the stock ECU via Technosquare or (2) add a piggy back computer such as a Greddy E-01 to trick or override the stock ECU settings.
I have both of these things done to my Z. Technosquare is a company in CA so you have to remove your ECU and send it to them with a list of the mods that you have on your car. They can do things to the ECU like adjust air/fuel, timing, speed limiter, rev limiter, etc. The cost is somewhere around $600 if I remember right. A piggy back computer (depending on what one you go with) can override the stock ECU and control things like timing, air/fuel mixture, etc. The Greddy E-01 is around $500 if I remember right.
ive heard some bad things about the technosquare ECU reflash....do a search on them, people arent getting much power out of the reflash. i would suggest an apexi safc-II, or the profec e-01. there is someone on the forums who has installed the e-01 and gained power on an n/a car. having piggyback is more efficient than a reflash IMO.
meet sounds good. Mike to get an image in your sig, you need to have the pic hosted on a site, then when you edit your profile you click the [img] button, then a box will pop up asking you to enter the url of your image. then you hit ok and it throws it in there. lemme know if you need somewhere to host your pic i can host it.
,