Detroit Area Z List part 3
#5763
Registered User
iTrader: (12)
Join Date: Aug 2007
Location: Ann Arbor, MI
Posts: 1,972
Likes: 0
Received 0 Likes
on
0 Posts
Well then your best bet is a local muffler shop. Or try it yourself (it really isn't that hard as long as you can jack the rear of the car up safely)
If you still want to drive over here for a shop, you can try mufflersandmore.com or gilsonmotorsports.com
Both are shops that local members have had good experience with.
If you still want to drive over here for a shop, you can try mufflersandmore.com or gilsonmotorsports.com
Both are shops that local members have had good experience with.
#5764
Registered User
iTrader: (32)
Join Date: Apr 2008
Location: Ann Arbor, Michigan
Posts: 2,115
Likes: 0
Received 0 Likes
on
0 Posts
^^ Why so urgent?
Gaskets, you can use RTV high temp copper sealant in place of a gasket. You will probably need bolts and nuts. Go with lock washers and nylon lock nuts. Lee can tell you about missing exhaust bolts.
Install time on a lift takes about 1 hour. On a garage floor, 2-3 hours. I suggest you go to Mufflers and More in Walled Lake. Super guys who will take care of you.
Gaskets, you can use RTV high temp copper sealant in place of a gasket. You will probably need bolts and nuts. Go with lock washers and nylon lock nuts. Lee can tell you about missing exhaust bolts.
Install time on a lift takes about 1 hour. On a garage floor, 2-3 hours. I suggest you go to Mufflers and More in Walled Lake. Super guys who will take care of you.
#5765
Registered User
iTrader: (32)
Join Date: Apr 2008
Location: Ann Arbor, Michigan
Posts: 2,115
Likes: 0
Received 0 Likes
on
0 Posts
Finally installed my Tourenn rear bumper. I had to modify the center portion to clear the Greddy EVO II exhaust and open up the middle. It's not the best fit. Especially at the turn signals lenses and there's too much of a gap at the trunk. I'll look to see if there are stops that can adjust the trunk height. The lower flares are exactly what my car needed and the black center lip completes the theme with the V2 front bumper.
#5771
Registered User
Join Date: Oct 2007
Location: Detroit
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
#5773
Registered User
Join Date: Sep 2003
Location: Sterling Heights, MI
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys, I have a 2008 350z and I've finally ordered a set of Eibach Pro-Kit Springs. I know you guys always give great advice and I'm wondering if someone would be interested in installing the springs. I have no problems driving to your location/garage.
#5776
Registered User
iTrader: (8)
Join Date: Jan 2007
Location: west palm beach, florida
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
what's up fellas, I'm in town for the summer training for the worldchampionships for speedskating. If you guys know of anything going on feel free to hit me up. Thanks harry
#5778
Registered User
Join Date: Sep 2003
Location: Sterling Heights, MI
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
Phreak, I knew you were going to say that. I'm trying to get it done as soon as I can. I just ordered a set of 19" Tenzo Type M Version 1 and I want to drop my car first. Hope I'm not asking too much.
#5779
Registered User
Join Date: Oct 2007
Location: Detroit
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Ive been way more busy than I want to be for the summer. I have an internship in Grand Rapids and have been working a lot of hours.
if anyone is from the grand rapids area let me know.
I have been saving up to go FI and picked up a UTEC last week. I will be selling my Turboxs exhaust to replace with a single and also some brand new resonated test pipes, if anyone is looking to pick some up let me know.
I also ended up getting 10mm spacers in the rear and it seems to look flush now in case anyone has Rotas and wants a clean look I would def. recommend them.
if anyone is from the grand rapids area let me know.
I have been saving up to go FI and picked up a UTEC last week. I will be selling my Turboxs exhaust to replace with a single and also some brand new resonated test pipes, if anyone is looking to pick some up let me know.
I also ended up getting 10mm spacers in the rear and it seems to look flush now in case anyone has Rotas and wants a clean look I would def. recommend them.
#5780
Registered User
iTrader: (12)
Join Date: Aug 2007
Location: Ann Arbor, MI
Posts: 1,972
Likes: 0
Received 0 Likes
on
0 Posts
Brian sorry about your Wife's mother. Send my condolences to her....
Anyways, whoever wants to meet up tonight we could meet around Novi/Farmington area first for dinner, then all drive to Woodward after.
What say you folks? I'm free after 7:30 or so
PS ~ I'm always up for installing somethin
Anyways, whoever wants to meet up tonight we could meet around Novi/Farmington area first for dinner, then all drive to Woodward after.
What say you folks? I'm free after 7:30 or so
PS ~ I'm always up for installing somethin
Last edited by AznSky; 06-18-2010 at 04:26 AM.