Detroit Area Z List part 3
#5901
Registered User
iTrader: (32)
Join Date: Apr 2008
Location: Ann Arbor, Michigan
Posts: 2,115
Likes: 0
Received 0 Likes
on
0 Posts
I did mine. Upper A-Arms are super easy. Two bolts accessed from inside the wheel well and one ball joint nut. You will immediately need an alignment though. Otherwise, I'm sure Kenny can get you set up quickly.
#5902
Registered User
Join Date: Sep 2003
Location: Livonia, MI
Posts: 619
Likes: 0
Received 0 Likes
on
0 Posts
Any tips for re-welding a cut exhaust? I am re-installing my stock exhaust system on the car, and we had to cut it to remove. It's a fairly clean cut, and I'd assume it just needs to be welded. I just don't want it to crack or leak over time.
#5903
Registered User
iTrader: (6)
Join Date: Aug 2008
Location: Farmington Hills, MI
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
See Kenny at Muffler's and More. He will hook you up - if you look on the prior page, Mekatoka (Deepu) posted a link to his website. BTW, we do not get kickbacks or anything - Kenny is just a stand up guy that does great work, plus I attend track days with him.
#5907
Registered User
iTrader: (1)
Join Date: Apr 2006
Location: Novi, Michigan
Posts: 3,078
Likes: 0
Received 0 Likes
on
0 Posts
Sorry to hear it didn't work out
Its always a good feeling when you fix something yourself.
Especially just diagnosing it yourself and working on it til you get it right...
Looks like it is something major, for your sake I hope its something simple
Water pump is prob the big culprit at this point looks like you did about everything else..hahah
Good luck
-AJ
Its always a good feeling when you fix something yourself.
Especially just diagnosing it yourself and working on it til you get it right...
Looks like it is something major, for your sake I hope its something simple
Water pump is prob the big culprit at this point looks like you did about everything else..hahah
Good luck
-AJ
#5908
Registered User
Join Date: Dec 2006
Location: Ypsilanti, MI
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
I was on State St. around 10AM. I took the BMW to Arbor Motion, just south of I94 off of State St., and my work is just north of I94 right off of State too.
I should hear today as to whether I popped a head gasket, or if there's a blockage, or it's just the water pump.
When I dropped it off, I found out part of what happened (I was a basket case right afterwards, and the engine compartment was hot):
When it started overheating, the pressure built up near the upper coolant hose and popped it off the thermostat housing. It explains the popping/coolant explosion that happened about a minute before I was able to get it home. I just hope the overheating wasn't too bad... It was only in the red zone for about a minute.
I should hear today as to whether I popped a head gasket, or if there's a blockage, or it's just the water pump.
When I dropped it off, I found out part of what happened (I was a basket case right afterwards, and the engine compartment was hot):
When it started overheating, the pressure built up near the upper coolant hose and popped it off the thermostat housing. It explains the popping/coolant explosion that happened about a minute before I was able to get it home. I just hope the overheating wasn't too bad... It was only in the red zone for about a minute.
#5911
Registered User
iTrader: (3)
Join Date: Nov 2007
Location: michigan
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
hey guys, its been a while. Anyone go to eyes on design last month? my car was in the "tuner" section and i got the dash signed by the lead designer for the 350z and GTR.
in other news, billy is selling his TT Z....
ive been super busy, but id like to cruise woodward this friday night, anyone down. Possibly tonight as well? (monday)
in other news, billy is selling his TT Z....
ive been super busy, but id like to cruise woodward this friday night, anyone down. Possibly tonight as well? (monday)
#5913
Registered User
iTrader: (12)
Join Date: Aug 2007
Location: Ann Arbor, MI
Posts: 1,972
Likes: 0
Received 0 Likes
on
0 Posts
dope!
And these are the wheels I was talking about:
https://my350z.com/forum/media-share...yna-shoot.html
And these are the wheels I was talking about:
https://my350z.com/forum/media-share...yna-shoot.html
#5916
Registered User
iTrader: (1)
Join Date: Apr 2006
Location: Novi, Michigan
Posts: 3,078
Likes: 0
Received 0 Likes
on
0 Posts
Ali,
good to see the car back man!
Edmond-that is really cool you got that signed....
I heard about Billy selling his car and just about everything with what he is going through... I think its a bad idea but someone will get a BA car...
good to see the car back man!
Edmond-that is really cool you got that signed....
I heard about Billy selling his car and just about everything with what he is going through... I think its a bad idea but someone will get a BA car...
#5917
Registered User
iTrader: (8)
Join Date: Dec 2008
Location: OH
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
dope!
And these are the wheels I was talking about:
https://my350z.com/forum/media-share...yna-shoot.html
And these are the wheels I was talking about:
https://my350z.com/forum/media-share...yna-shoot.html
Just dropped off the Z to get detailed, whole car was filthy inside and out
Man I hate theses motorized cubbys for the Navs the motor on mine went bad so I bought another cubby six months back to replace the broken one, and what ya know that ones also bad.. God I give up
#5918
Registered User
iTrader: (12)
Join Date: Aug 2007
Location: Ann Arbor, MI
Posts: 1,972
Likes: 0
Received 0 Likes
on
0 Posts
http://www.wheeldude.com/catalog/pro...oducts_id=5887
My bad, they're $1299. Still hella cheaper than Volks. But if you can find some good used volks then that maybe a better deal
You can also order tires and lugs as a package.
Call up wheeldude and see what he can do for you
My bad, they're $1299. Still hella cheaper than Volks. But if you can find some good used volks then that maybe a better deal
You can also order tires and lugs as a package.
Call up wheeldude and see what he can do for you