bonarsauce

iTrader: (16)

Yeah wasn't bad at all probably easier then the fronts i'd say. rotors would be pretty simple too. You figure out which ones you are getting?

sportbiketed

iTrader: (11)

Dave just get the setup I got from maperformance, hawk HP plus pads and rotorpros rotors.

SmoothZ

iTrader: (13)

That new vendor (S&R Performance) quoted me $589 shipped for rotors and pads. What do you guys think? I believe he was including slotted rotors and Hawk pads for all 4 corners. At least it better be....lol

sportbiketed

iTrader: (11)

My setup was cheaper from map.

Zivman

iTrader: (19)

I've run spacers on my SSR wheels and no spacers on my new enkei wheels and honestly it doesn't really matter. If you are running wheels with a lip, then it matters as it affects the lip size, but if you are running a flush style wheel, it doesn't make of a difference. either the spacer pushes the wheel out, or the hub of the wheel is bigger and it pushes the wheel out. really not much difference..... keep in mind, you will likely need new/longer studs if you use a larger than 10 mm spacer

SmoothZ

iTrader: (13)

I think for me it's just a matter of preference.

Zivman

iTrader: (19)

obviously buying wheels with the proper offset is the way to go, but if that isn't an option due to availability, price or whatever, spacers are not a that big of a deal.... as long as they are done properly

Stock2Autocrozz

iTrader: (6)

BBS forged gtr's with decent meats to burn through...~1300

Thinkin that 15 spacer and new studs may have to happen after this f'n nitrous sitch...

Good note, the crawford plenum showed up yesterday

SmoothZ

iTrader: (13)

I have today off if you want to swing by for that new gasket. You're also going to need plastic (aka marine) washers.

bonarsauce

iTrader: (16)

Dave where did you get your front bumper painted and for approximately how much? Doin a little research think nismo v2 possibly with canards removed will be my next purchase.

SmoothZ

iTrader: (13)

Got the bumper through this site, possibly a vendor. I took it to a paint shop by AV Ford on Co Rd 42 and had them do all the work. It was an insurance claim.

Spork

iTrader: (6)

My V2 with canards cost $400 to paint.

What's the status on Travis' car? I wanna see my kit on his!

bonarsauce

iTrader: (16)

Thanks spork. Dtm quoted me the bumper fully painted and cleared shipped to my door for about 630, otherwise i can get a v2 for about 140 plus shipping not painted.

SmoothZ

iTrader: (13)

Travis' car looks great!

SmoothZ

iTrader: (13)

BTW, the deal you're getting sounds good. It cost me probably $400 for the bumper and another $400 for the paint. I'm probably way under with those numbers.

sportbiketed

iTrader: (11)

So I spun out and hit a curb a couple weeks ago, I finally got my car back today. I was not drifting, just went the corner a little too fast for my bald tires.


Heres how she looks now:

Stock2Autocrozz

iTrader: (6)

Dave, up in brainerd crawford plenum install staes to reuse old gasket? I also go oneshippedwith the used one i bought so unsure how much diff it'll make if we can't orchestrate me gettin south there over next few days...

silverbullet_Z

iTrader: (3)

Got pics of the accident??

bonarsauce

iTrader: (16)

New rims eh? You mess the old ones up when you hit the curb?

cityslick43

Any Minnesota meats coming up or anybody wanna get a bunch of ppl and hang out one night before winter???? and anyone planning to drive there Z in the winter???

I live in Bloomington

EMAIL- rhashw@yahoo.com