I got a set of the J-Spec clear markers for the 07. How many mounting points or screws are there in the front bumper? I saw what looked like a make shift diagram but everything was in jap. so i couldn't undestand any of it. And lord i hate waiting for wheels. Latest update, july 14th. I WANT MY DAMN WHEELS

 

there's a good amount...a set on top, then all the bottom ones that attach w/ the under tray. There's also a few on the sides that attach to the wheel-well liner.

I was able to remove my '05 corners without removing the bumper fascia, but it would have been easier to just remove the bumper. If you're going to the karting tomorrow, I can show you where most of the clips are.

 

I put led markers in my car by taking just the lower cover off the bottom like you would for an oil change.Drivers side is easy to get to the pass side is a little harder. Use a 1/4 drive bit set up with a philips head bit ,18 in exstension and wobble socket .did mine in 30min with wireing.I had the car on a lift.

 

i took my whole front bumper off...btw please dont use the word "jap"...thanks

 

Sorry i abbreviated japanese. Looks like i'll take the bumper off .
Thanks guys

 

where's a good place to get 06+ clear markers?

 

Well guys i put them on the car and it looks MUCH better. I cant stand the orange reflectors, it makes the whole front end look wierd. The clear ones blend everything in including the wheels. It just makes for a better overall looking car. I know this thread is worthless without pics and all, i'll take some later. The 06+ clear markers can be found at theZstore.com just google 350z clear marker and it will be the 1st one or so. I managed to put them in without taking off the bumper at all. Just unscrewed the front dam and replaced them. Took about 20 minutes with a ramp.

 

Wanna take pics of the mounting/screw points. I have mine and just havent got around to throwing them in yet. Been CarPC busy =[

 

maybe post some pics... i just bought a pair but not sure if i need to remove bumper or not... a lot of ppl are saying you dont have to, but it'll make ur job a lot easier...

 

Guys it wont make it that much easier and is MUCH more of a pain in the *** if you take off the entire bumper. I'll post some pics when i can. The thing is as long as you have a lift, it should take like 20 minutes.